From mboxrd@z Thu Jan  1 00:00:00 1970
From: narmstrong@baylibre.com (Neil Armstrong)
Date: Fri, 17 Nov 2017 14:16:49 +0100
Subject: [PATCH 4/4] ARM64: dts: meson-axg: add pinctrl DT info for
 Meson-AXG SoC
In-Reply-To: <20171108064802.1707-1-yixun.lan@amlogic.com>
References: <20171108064802.1707-1-yixun.lan@amlogic.com>
Message-ID: <062aca8c-9539-2ad3-75b6-19381aa24d23@baylibre.com>
To: linus-amlogic@lists.infradead.org
List-Id: linus-amlogic.lists.infradead.org

On 08/11/2017 07:48, Yixun Lan wrote:
> From: Xingyu Chen <xingyu.chen@amlogic.com>
> 
> Add new pinctrl DT info for the Amlogic's Meson-AXG SoC.
> 
> Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
> ---
>  arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 43 ++++++++++++++++++++++++++++++
>  1 file changed, 43 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> index 4a07fc7daa99..771a1c46b8a8 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
> @@ -9,6 +9,7 @@
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/clock/axg-clkc.h>
>  #include <dt-bindings/clock/gxbb-aoclkc.h>
> +#include <dt-bindings/gpio/meson-axg-gpio.h>
>  
>  / {
>  	compatible = "amlogic,meson-axg";
> @@ -173,6 +174,32 @@
>  			#mbox-cells = <1>;
>  		};
>  
> +		periphs: periphs at ff634000 {
> +			compatible = "simple-bus";
> +			reg = <0x0 0xff634000 0x0 0x2000>;
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>;
> +
> +			pinctrl_periphs: pinctrl at 480 {
> +				compatible = "amlogic,meson-axg-periphs-pinctrl";
> +				#address-cells = <2>;
> +				#size-cells = <2>;
> +				ranges;
> +
> +				gpio: bank at 480 {
> +					reg = <0x0 0x00480 0x0 0x40>,
> +						<0x0 0x004e8 0x0 0x14>,
> +						<0x0 0x00520 0x0 0x14>,
> +						<0x0 0x00430 0x0 0x3c>;
> +					reg-names = "mux", "pull", "pull-enable", "gpio";
> +					gpio-controller;
> +					#gpio-cells = <2>;
> +					gpio-ranges = <&pinctrl_periphs 0 0 86>;
> +				};
> +			};
> +		};
> +
>  		sram: sram at fffc0000 {
>  			compatible = "amlogic,meson-axg-sram", "mmio-sram";
>  			reg = <0x0 0xfffc0000 0x0 0x20000>;
> @@ -197,6 +224,22 @@
>  			#address-cells = <2>;
>  			#size-cells = <2>;
>  			ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
> +			pinctrl_aobus: pinctrl at 14 {
> +				compatible = "amlogic,meson-axg-aobus-pinctrl";
> +				#address-cells = <2>;
> +				#size-cells = <2>;
> +				ranges;
> +
> +				gpio_ao: bank at 14 {
> +					reg = <0x0 0x00014 0x0 0x8>,
> +						<0x0 0x0002c 0x0 0x4>,
> +						<0x0 0x00024 0x0 0x8>;
> +					reg-names = "mux", "pull", "gpio";
> +					gpio-controller;
> +					#gpio-cells = <2>;
> +					gpio-ranges = <&pinctrl_aobus 0 0 15>;
> +				};
> +			};
>  
>  			uart_AO: serial at 3000 {
>  				compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
> 

Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>