From: narmstrong@baylibre.com (Neil Armstrong)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH] clk: meson: remove obsolete register access
Date: Wed, 20 Jun 2018 10:31:56 +0200 [thread overview]
Message-ID: <0e57617b-0ece-3c6d-f124-6197ef82b1c7@baylibre.com> (raw)
In-Reply-To: <20180619160050.26958-1-jbrunet@baylibre.com>
On 19/06/2018 18:00, Jerome Brunet wrote:
> The legacy method to access the hhi register space is not longer used.
> We can safely drop it now.
>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> ---
> drivers/clk/meson/axg.c | 37 ++-----------------------------------
> drivers/clk/meson/gxbb.c | 36 ++----------------------------------
> 2 files changed, 4 insertions(+), 69 deletions(-)
>
> diff --git a/drivers/clk/meson/axg.c b/drivers/clk/meson/axg.c
> index bd4dbc696b88..3fb884db1b10 100644
> --- a/drivers/clk/meson/axg.c
> +++ b/drivers/clk/meson/axg.c
> @@ -12,7 +12,6 @@
> #include <linux/clk.h>
> #include <linux/clk-provider.h>
> #include <linux/init.h>
> -#include <linux/of_address.h>
> #include <linux/of_device.h>
> #include <linux/mfd/syscon.h>
> #include <linux/platform_device.h>
> @@ -995,49 +994,17 @@ static const struct of_device_id clkc_match_table[] = {
> {}
> };
>
> -static const struct regmap_config clkc_regmap_config = {
> - .reg_bits = 32,
> - .val_bits = 32,
> - .reg_stride = 4,
> -};
> -
> static int axg_clkc_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> - struct resource *res;
> - void __iomem *clk_base = NULL;
> struct regmap *map;
> int ret, i;
>
> /* Get the hhi system controller node if available */
> map = syscon_node_to_regmap(of_get_parent(dev->of_node));
> if (IS_ERR(map)) {
> - dev_err(dev,
> - "failed to get HHI regmap - Trying obsolete regs\n");
> -
> - /*
> - * FIXME: HHI registers should be accessed through
> - * the appropriate system controller. This is required because
> - * there is more than just clocks in this register space
> - *
> - * This fallback method is only provided temporarily until
> - * all the platform DTs are properly using the syscon node
> - */
> - res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> - if (!res)
> - return -EINVAL;
> -
> -
> - clk_base = devm_ioremap(dev, res->start, resource_size(res));
> - if (!clk_base) {
> - dev_err(dev, "Unable to map clk base\n");
> - return -ENXIO;
> - }
> -
> - map = devm_regmap_init_mmio(dev, clk_base,
> - &clkc_regmap_config);
> - if (IS_ERR(map))
> - return PTR_ERR(map);
> + dev_err(dev, "failed to get HHI regmap\n");
> + return PTR_ERR(map);
> }
>
> /* Populate regmap for the regmap backed clocks */
> diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
> index 177fffb9ebef..297ebc391475 100644
> --- a/drivers/clk/meson/gxbb.c
> +++ b/drivers/clk/meson/gxbb.c
> @@ -7,7 +7,6 @@
> #include <linux/clk.h>
> #include <linux/clk-provider.h>
> #include <linux/init.h>
> -#include <linux/of_address.h>
> #include <linux/of_device.h>
> #include <linux/mfd/syscon.h>
> #include <linux/platform_device.h>
> @@ -2228,17 +2227,9 @@ static const struct of_device_id clkc_match_table[] = {
> {},
> };
>
> -static const struct regmap_config clkc_regmap_config = {
> - .reg_bits = 32,
> - .val_bits = 32,
> - .reg_stride = 4,
> -};
> -
> static int gxbb_clkc_probe(struct platform_device *pdev)
> {
> const struct clkc_data *clkc_data;
> - struct resource *res;
> - void __iomem *clk_base;
> struct regmap *map;
> int ret, i;
> struct device *dev = &pdev->dev;
> @@ -2250,31 +2241,8 @@ static int gxbb_clkc_probe(struct platform_device *pdev)
> /* Get the hhi system controller node if available */
> map = syscon_node_to_regmap(of_get_parent(dev->of_node));
> if (IS_ERR(map)) {
> - dev_err(dev,
> - "failed to get HHI regmap - Trying obsolete regs\n");
> -
> - /*
> - * FIXME: HHI registers should be accessed through
> - * the appropriate system controller. This is required because
> - * there is more than just clocks in this register space
> - *
> - * This fallback method is only provided temporarily until
> - * all the platform DTs are properly using the syscon node
> - */
> - res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> - if (!res)
> - return -EINVAL;
> -
> - clk_base = devm_ioremap(dev, res->start, resource_size(res));
> - if (!clk_base) {
> - dev_err(dev, "Unable to map clk base\n");
> - return -ENXIO;
> - }
> -
> - map = devm_regmap_init_mmio(dev, clk_base,
> - &clkc_regmap_config);
> - if (IS_ERR(map))
> - return PTR_ERR(map);
> + dev_err(dev, "failed to get HHI regmap\n");
> + return PTR_ERR(map);
> }
>
> /* Populate regmap for the common regmap backed clocks */
>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
next prev parent reply other threads:[~2018-06-20 8:31 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-19 16:00 Jerome Brunet
2018-06-20 8:31 ` Neil Armstrong [this message]
2018-06-22 10:42 ` Jerome Brunet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=0e57617b-0ece-3c6d-f124-6197ef82b1c7@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®