[PATCH v2 6/7] gxbb: clk: Move MESON_GATE macro to gxbb

[mturquette@baylibre.com (Michael Turquette)]

Hi Alexander,

Quoting Alexander M?ller (2016-07-13 10:49:40)
> Signed-off-by: Alexander M?ller <serveralex@gmail.com>
> ---
>  drivers/clk/meson/clkc.h |  14 ----
>  drivers/clk/meson/gxbb.c | 176 +++++++++++++++++++++++++----------------------
>  2 files changed, 95 insertions(+), 95 deletions(-)
> 
> diff --git a/drivers/clk/meson/clkc.h b/drivers/clk/meson/clkc.h
> index 53326c3..061a01e 100644
> --- a/drivers/clk/meson/clkc.h
> +++ b/drivers/clk/meson/clkc.h
> @@ -97,20 +97,6 @@ struct meson_clk_mpll {
>         spinlock_t *lock;
>  };
>  
> -#define MESON_GATE(_name, _reg, _bit)                                  \
> -struct clk_gate gxbb_##_name = {                                               \

Please leave this macro in clkc.h, but change the above line to:

	#define MESON_GATE(_name, _reg, _bit)	\
	struct clk_gate _name = {		\

Note that gxbb_##_name is replaced with _name. I should have done it
like this from the beginning but it's a bit of a brain fart.

>  /* Everything Else (EE) domain gates */
> -static MESON_GATE(ddr, HHI_GCLK_MPEG0, 0);

Then reflow the above gxbb gate clock like so:

	static MESON_GATE(gxbb_ddr, HHI_GCLK_MPEG0, 0);

Then you can re-use the same macro in your meson8b driver by prefixing
all of your gate clocks with "meson8b_".

Regards,
Mike