[PATCH v2 0/4] ARM: amlogic: Add spifc support to Amlogic's GXBB family

[jbrunet@baylibre.com (Jerome Brunet)]

This patch series adds the necessary pins, clocks and device tree nodes to
enable the spifc controller on the GXBB family. I had to add the nand pins
in pintctrl as the pinmux setting left by u-boot was conflicting with the
spifc pinmux during my test on the P200.

Changes since v1 at : http://lkml.kernel.org/r/1473261223-15412-1-git-send-email-jbrunet at baylibre.com
 * Omit patches :
  - dt-bindings: spi-meson: Add GXBB Compatible string
  - spi: meson: Add GXBB compatible
  Sent as dedicated series
 * Omit patch:
  - clk: gxbb: expose spifc clock
  Already applied
 * Rename SPI flash controller pins from spifc_* to nor_* to keep the
   name aligned with the datasheet

Jerome Brunet (3):
  pinctrl: amlogic: gxbb: add spi nor pins
  pinctrl: amlogic: gxbb: add nand pins
  ARM64: dts: amlogic: add spi nor pins

Neil Armstrong (1):
  ARM64: dts: meson-gxbb: Add SPIFC node

 arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 19 +++++++++++++++
 drivers/pinctrl/meson/pinctrl-meson-gxbb.c  | 37 +++++++++++++++++++++++++++++
 2 files changed, 56 insertions(+)

-- 
2.7.4