From: narmstrong@baylibre.com (Neil Armstrong)
To: linus-amlogic@lists.infradead.org
Subject: [RFC PATCH 02/13] ARM64: dts: meson-gxbb: Move common nodes to meson-gx
Date: Fri, 21 Oct 2016 16:40:27 +0200 [thread overview]
Message-ID: <1477060838-14164-3-git-send-email-narmstrong@baylibre.com> (raw)
In-Reply-To: <1477060838-14164-1-git-send-email-narmstrong@baylibre.com>
Move common nodes between GXBB and GXL in to the common GX dtsi.
Leave the clock attributes in the GXBB dtsi for now.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 131 +++++++++++++++++++++++
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 155 ++++------------------------
2 files changed, 149 insertions(+), 137 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index fd1d0de..91be4f2 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -129,6 +129,30 @@
#clock-cells = <0>;
};
+ firmware {
+ sm: secure-monitor {
+ compatible = "amlogic,meson-gx-sm", "amlogic,meson-gxbb-sm";
+ };
+ };
+
+ efuse: efuse {
+ compatible = "amlogic,meson-gx-efuse", "amlogic,meson-gxbb-efuse";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sn: sn at 14 {
+ reg = <0x14 0x10>;
+ };
+
+ eth_mac: eth_mac at 34 {
+ reg = <0x34 0x10>;
+ };
+
+ bid: bid at 46 {
+ reg = <0x46 0x30>;
+ };
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <2>;
@@ -142,6 +166,12 @@
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
+ reset: reset-controller at 4404 {
+ compatible = "amlogic,meson-gx-reset", "amlogic,meson-gxbb-reset";
+ reg = <0x0 0x04404 0x0 0x20>;
+ #reset-cells = <1>;
+ };
+
uart_A: serial at 84c0 {
compatible = "amlogic,meson-uart";
reg = <0x0 0x84c0 0x0 0x14>;
@@ -149,6 +179,76 @@
clocks = <&xtal>;
status = "disabled";
};
+
+ uart_B: serial at 84dc {
+ compatible = "amlogic,meson-uart";
+ reg = <0x0 0x84dc 0x0 0x14>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&xtal>;
+ status = "disabled";
+ };
+
+ i2c_A: i2c at 8500 {
+ compatible = "amlogic,meson-gxbb-i2c";
+ reg = <0x0 0x08500 0x0 0x20>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ pwm_ab: pwm at 8550 {
+ compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+ reg = <0x0 0x08550 0x0 0x10>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm_cd: pwm at 8650 {
+ compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+ reg = <0x0 0x08650 0x0 0x10>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pwm_ef: pwm at 86c0 {
+ compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
+ reg = <0x0 0x086c0 0x0 0x10>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ uart_C: serial at 8700 {
+ compatible = "amlogic,meson-uart";
+ reg = <0x0 0x8700 0x0 0x14>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&xtal>;
+ status = "disabled";
+ };
+
+ i2c_B: i2c at 87c0 {
+ compatible = "amlogic,meson-gxbb-i2c";
+ reg = <0x0 0x087c0 0x0 0x20>;
+ interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c_C: i2c at 87e0 {
+ compatible = "amlogic,meson-gxbb-i2c";
+ reg = <0x0 0x087e0 0x0 0x20>;
+ interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ watchdog at 98d0 {
+ compatible = "amlogic,meson-gx-wdt", "amlogic,meson-gxbb-wdt";
+ reg = <0x0 0x098d0 0x0 0x10>;
+ clocks = <&xtal>;
+ };
};
gic: interrupt-controller at c4301000 {
@@ -178,6 +278,13 @@
clocks = <&xtal>;
status = "disabled";
};
+
+ ir: ir at 580 {
+ compatible = "amlogic,meson-gxbb-ir";
+ reg = <0x0 0x00580 0x0 0x40>;
+ interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
+ };
};
periphs: periphs at c8834000 {
@@ -186,6 +293,11 @@
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
+
+ rng {
+ compatible = "amlogic,meson-rng";
+ reg = <0x0 0x0 0x0 0x4>;
+ };
};
@@ -195,6 +307,25 @@
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
+
+ mailbox: mailbox at 404 {
+ compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
+ reg = <0 0x404 0 0x4c>;
+ interrupts = <0 208 IRQ_TYPE_EDGE_RISING>,
+ <0 209 IRQ_TYPE_EDGE_RISING>,
+ <0 210 IRQ_TYPE_EDGE_RISING>;
+ #mbox-cells = <1>;
+ };
+ };
+
+ ethmac: ethernet at c9410000 {
+ compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac";
+ reg = <0x0 0xc9410000 0x0 0x10000
+ 0x0 0xc8834540 0x0 0x4>;
+ interrupts = <0 8 1>;
+ interrupt-names = "macirq";
+ phy-mode = "rgmii";
+ status = "disabled";
};
apb: apb at d0000000 {
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 22940bb..7c5bf14 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
@@ -50,30 +50,6 @@
/ {
compatible = "amlogic,meson-gxbb";
- firmware {
- sm: secure-monitor {
- compatible = "amlogic,meson-gxbb-sm";
- };
- };
-
- efuse: efuse {
- compatible = "amlogic,meson-gxbb-efuse";
- #address-cells = <1>;
- #size-cells = <1>;
-
- sn: sn at 14 {
- reg = <0x14 0x10>;
- };
-
- eth_mac: eth_mac at 34 {
- reg = <0x34 0x10>;
- };
-
- bid: bid at 46 {
- reg = <0x46 0x30>;
- };
- };
-
soc {
usb0_phy: phy at c0000000 {
compatible = "amlogic,meson-gxbb-usb2-phy";
@@ -117,73 +93,17 @@
dr_mode = "host";
status = "disabled";
};
-
- ethmac: ethernet at c9410000 {
- compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
- reg = <0x0 0xc9410000 0x0 0x10000
- 0x0 0xc8834540 0x0 0x4>;
- interrupts = <0 8 1>;
- interrupt-names = "macirq";
- clocks = <&clkc CLKID_ETH>,
- <&clkc CLKID_FCLK_DIV2>,
- <&clkc CLKID_MPLL2>;
- clock-names = "stmmaceth", "clkin0", "clkin1";
- phy-mode = "rgmii";
- status = "disabled";
- };
};
};
-&cbus {
- reset: reset-controller at 4404 {
- compatible = "amlogic,meson-gxbb-reset";
- reg = <0x0 0x04404 0x0 0x20>;
- #reset-cells = <1>;
- };
-
- uart_B: serial at 84dc {
- compatible = "amlogic,meson-uart";
- reg = <0x0 0x84dc 0x0 0x14>;
- interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xtal>;
- status = "disabled";
- };
-
- pwm_ab: pwm at 8550 {
- compatible = "amlogic,meson-gxbb-pwm";
- reg = <0x0 0x08550 0x0 0x10>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- pwm_cd: pwm at 8650 {
- compatible = "amlogic,meson-gxbb-pwm";
- reg = <0x0 0x08650 0x0 0x10>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- pwm_ef: pwm at 86c0 {
- compatible = "amlogic,meson-gxbb-pwm";
- reg = <0x0 0x086c0 0x0 0x10>;
- #pwm-cells = <3>;
- status = "disabled";
- };
-
- uart_C: serial at 8700 {
- compatible = "amlogic,meson-uart";
- reg = <0x0 0x8700 0x0 0x14>;
- interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xtal>;
- status = "disabled";
- };
-
- watchdog at 98d0 {
- compatible = "amlogic,meson-gxbb-wdt";
- reg = <0x0 0x098d0 0x0 0x10>;
- clocks = <&xtal>;
- };
+ðmac {
+ clocks = <&clkc CLKID_ETH>,
+ <&clkc CLKID_FCLK_DIV2>,
+ <&clkc CLKID_MPLL2>;
+ clock-names = "stmmaceth", "clkin0", "clkin1";
+};
+&cbus {
spifc: spi at 8c80 {
compatible = "amlogic,meson-gxbb-spifc";
reg = <0x0 0x08c80 0x0 0x80>;
@@ -192,36 +112,6 @@
clocks = <&clkc CLKID_SPI>;
status = "disabled";
};
-
- i2c_A: i2c at 8500 {
- compatible = "amlogic,meson-gxbb-i2c";
- reg = <0x0 0x08500 0x0 0x20>;
- interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc CLKID_I2C>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c_B: i2c at 87c0 {
- compatible = "amlogic,meson-gxbb-i2c";
- reg = <0x0 0x087c0 0x0 0x20>;
- interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc CLKID_I2C>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c_C: i2c at 87e0 {
- compatible = "amlogic,meson-gxbb-i2c";
- reg = <0x0 0x087e0 0x0 0x20>;
- interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
- clocks = <&clkc CLKID_I2C>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
};
&aobus {
@@ -298,13 +188,6 @@
#reset-cells = <1>;
};
- ir: ir at 580 {
- compatible = "amlogic,meson-gxbb-ir";
- reg = <0x0 0x00580 0x0 0x40>;
- interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
- status = "disabled";
- };
-
pwm_ab_AO: pwm at 550 {
compatible = "amlogic,meson-gxbb-pwm";
reg = <0x0 0x0550 0x0 0x10>;
@@ -324,11 +207,6 @@
};
&periphs {
- rng {
- compatible = "amlogic,meson-rng";
- reg = <0x0 0x0 0x0 0x4>;
- };
-
pinctrl_periphs: pinctrl at 4b0 {
compatible = "amlogic,meson-gxbb-periphs-pinctrl";
#address-cells = <2>;
@@ -536,15 +414,18 @@
#clock-cells = <1>;
reg = <0x0 0x0 0x0 0x3db>;
};
+};
- mailbox: mailbox at 404 {
- compatible = "amlogic,meson-gxbb-mhu";
- reg = <0 0x404 0 0x4c>;
- interrupts = <0 208 IRQ_TYPE_EDGE_RISING>,
- <0 209 IRQ_TYPE_EDGE_RISING>,
- <0 210 IRQ_TYPE_EDGE_RISING>;
- #mbox-cells = <1>;
- };
+&i2c_A {
+ clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_B {
+ clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_C {
+ clocks = <&clkc CLKID_I2C>;
};
&sd_emmc_a {
--
1.9.1
next prev parent reply other threads:[~2016-10-21 14:40 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-21 14:40 [RFC PATCH 00/13] ARM64: meson-gxl: Add extended support Neil Armstrong
2016-10-21 14:40 ` [RFC PATCH 01/13] pinctrl: meson: Add GXL pinctrl definitions Neil Armstrong
2016-10-24 1:03 ` Linus Walleij
2016-10-31 9:40 ` Neil Armstrong
2016-10-31 18:23 ` Kevin Hilman
2016-10-30 20:41 ` Rob Herring
2016-10-21 14:40 ` Neil Armstrong [this message]
2016-10-21 14:40 ` [RFC PATCH 03/13] ARM64: dts: meson-gxl: Add pinctrl nodes Neil Armstrong
2016-10-21 14:40 ` [RFC PATCH 04/13] ARM64: dts: meson-gxl: Add clock nodes Neil Armstrong
2016-10-21 14:40 ` [RFC PATCH 05/13] ARM64: dts: meson-gxl: Add i2c nodes Neil Armstrong
2016-10-21 14:40 ` [RFC PATCH 06/13] ARM64: dts: meson-gxl: Add MMC/SD/SDIO nodes Neil Armstrong
2016-10-21 14:40 ` [RFC PATCH 07/13] ARM64: dts: meson-gxl-p23x: Add uart pinctrl Neil Armstrong
2016-10-21 14:40 ` [RFC PATCH 08/13] dwmac-meson8b: add support for phy selection Neil Armstrong
2016-10-21 15:46 ` Andrew Lunn
2016-10-21 15:54 ` Andrew Lunn
2016-10-21 15:59 ` Neil Armstrong
2016-10-21 16:08 ` Andrew Lunn
2016-10-31 14:23 ` Neil Armstrong
2016-10-21 14:40 ` [RFC PATCH 09/13] net: phy: Add Meson GXL Internal PHY driver Neil Armstrong
2016-10-21 20:56 ` Florian Fainelli
2016-10-31 14:25 ` Neil Armstrong
2016-10-21 14:40 ` [RFC PATCH 10/13] ARM64: dts: meson-gxl: Add ethernet nodes with internal PHY Neil Armstrong
2016-10-21 14:40 ` [RFC PATCH 11/13] ARM64: dts: meson-gxl-p23x: Enable ethernet Neil Armstrong
2016-10-21 14:40 ` [RFC PATCH 12/13] ARM64: dts: meson-gxl-p23x: Add SD/SDIO/MMC and PWM nodes Neil Armstrong
2016-10-21 14:40 ` [RFC PATCH 13/13] ARM64: dts: meson-gxl-p23x: Enable IR receiver Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1477060838-14164-3-git-send-email-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®