mirror of https://lore.kernel.org/linux-amlogic/
 help / color / mirror / Atom feed
From: sudeep.holla@arm.com (Sudeep Holla)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH v5 8/8] firmware: arm_scpi: add support for legacy SCPI compatible
Date: Wed,  2 Nov 2016 22:52:11 -0600	[thread overview]
Message-ID: <1478148731-11712-9-git-send-email-sudeep.holla@arm.com> (raw)
In-Reply-To: <1478148731-11712-1-git-send-email-sudeep.holla@arm.com>

This patch adds new DT match table to setup the support for legacy SCPI
protocol. It aldo adds "arm,legacy-scpi" to the legacy match entry.

Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
---
 drivers/firmware/arm_scpi.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/firmware/arm_scpi.c b/drivers/firmware/arm_scpi.c
index 902233642bd3..a38e1537fb8e 100644
--- a/drivers/firmware/arm_scpi.c
+++ b/drivers/firmware/arm_scpi.c
@@ -871,6 +871,11 @@ static int scpi_alloc_xfer_list(struct device *dev, struct scpi_chan *ch)
 	return 0;
 }
 
+static const struct of_device_id legacy_scpi_of_match[] = {
+	{.compatible = "arm,legacy-scpi"},
+	{},
+};
+
 static int scpi_probe(struct platform_device *pdev)
 {
 	int count, idx, ret;
@@ -883,6 +888,9 @@ static int scpi_probe(struct platform_device *pdev)
 	if (!scpi_info)
 		return -ENOMEM;
 
+	if (of_match_device(legacy_scpi_of_match, &pdev->dev))
+		scpi_info->is_legacy = true;
+
 	count = of_count_phandle_with_args(np, "mboxes", "#mbox-cells");
 	if (count < 0) {
 		dev_err(dev, "no mboxes property in '%s'\n", np->full_name);
@@ -984,6 +992,7 @@ static int scpi_probe(struct platform_device *pdev)
 
 static const struct of_device_id scpi_of_match[] = {
 	{.compatible = "arm,scpi"},
+	{.compatible = "arm,legacy-scpi"},
 	{},
 };
 
-- 
1.9.1

  parent reply	other threads:[~2016-11-03  4:52 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-03  4:52 [PATCH 0/8] firmware: arm_scpi: add support for legacy SCPI protocol Sudeep Holla
2016-11-03  4:52 ` [PATCH v5 1/8] firmware: arm_scpi: add command indirection to support legacy commands Sudeep Holla
2016-11-03  4:52 ` [PATCH v5 2/8] firmware: arm_scpi: increase MAX_DVFS_OPPS to 16 entries Sudeep Holla
2016-11-03  4:52 ` [PATCH v5 3/8] firmware: arm_scpi: add alternative legacy structures, functions and macros Sudeep Holla
2016-11-03  4:52 ` [PATCH v5 4/8] firmware: arm_scpi: allow firmware with get_capabilities not implemented Sudeep Holla
2016-11-03  4:52 ` [PATCH v5 5/8] Documentation: bindings: decouple juno specific details from generic binding Sudeep Holla
2016-11-10  1:18   ` Rob Herring
2016-11-03  4:52 ` [PATCH v5 6/8] Documentation: bindings: add compatible specific to legacy SCPI protocol Sudeep Holla
2016-11-08 14:32   ` Sudeep Holla
2016-11-10  1:22   ` Rob Herring
2016-11-10 10:26     ` Sudeep Holla
2016-11-10 14:12       ` Rob Herring
2016-11-10 14:34         ` Sudeep Holla
2016-11-10 19:03           ` Olof Johansson
2016-11-11  7:48             ` Sudeep Holla
2016-11-11 13:34               ` Rob Herring
2016-11-11 14:19                 ` Sudeep Holla
2016-11-15 16:36                   ` Sudeep Holla
2016-11-03  4:52 ` [PATCH v5 7/8] Documentation: bindings: Add support for Amlogic GXBB " Sudeep Holla
2016-11-10  1:23   ` Rob Herring
2016-11-03  4:52 ` Sudeep Holla [this message]
2016-11-03  9:12 ` [PATCH 0/8] firmware: arm_scpi: add support for legacy " Neil Armstrong
2016-11-08 14:51 ` Russell King - ARM Linux
2016-11-08 15:11   ` Sudeep Holla
2016-11-08 15:40     ` Russell King - ARM Linux
2016-11-08 16:06       ` Russell King - ARM Linux
2016-11-08 17:37         ` Sudeep Holla
2016-11-08 17:46           ` Russell King - ARM Linux
2016-11-21 15:04             ` Ryan Harkin
2016-11-21 15:12               ` Sudeep Holla
2016-11-08 16:08       ` Sudeep Holla
2016-11-08 16:13         ` Russell King - ARM Linux

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1478148731-11712-9-git-send-email-sudeep.holla@arm.com \
    --to=sudeep.holla@arm.com \
    --cc=linus-amlogic@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®