From: mturquette@baylibre.com (Michael Turquette)
To: linus-amlogic@lists.infradead.org
Subject: [RFC 2/7] clk: add set_phase core function
Date: Thu, 11 May 2017 18:24:00 -0000 [thread overview]
Message-ID: <149228804557.88277.9328911897442773852@resonance> (raw)
In-Reply-To: <20170321183330.26722-3-jbrunet@baylibre.com>
Hi Jerome,
Quoting Jerome Brunet (2017-03-21 19:33:25)
> Create a core function for set_phase, as it is done for set_rate and
> set_parent.
>
> This rework is done to ease the integration of "protected" clock
> functionality.
>
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> ---
> drivers/clk/clk.c | 31 +++++++++++++++++++------------
> 1 file changed, 19 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
> index e77f03a47da6..57982a06dbce 100644
> --- a/drivers/clk/clk.c
> +++ b/drivers/clk/clk.c
> @@ -1876,6 +1876,23 @@ int clk_set_parent(struct clk *clk, struct clk *parent)
> }
> EXPORT_SYMBOL_GPL(clk_set_parent);
>
> +static int clk_core_set_phase(struct clk_core *core, int degrees)
s/clk_core_set_phase/clk_core_set_phase_nolock/
Otherwise patch looks OK to me.
Regards,
Mike
> +{
> + int ret = -EINVAL;
> +
> + if (!core)
> + return 0;
> +
> + trace_clk_set_phase(clk->core, degrees);
> +
> + if (core->ops->set_phase)
> + ret = core->ops->set_phase(core->hw, degrees);
> +
> + trace_clk_set_phase_complete(core, degrees);
> +
> + return ret;
> +}
> +
> /**
> * clk_set_phase - adjust the phase shift of a clock signal
> * @clk: clock signal source
> @@ -1898,7 +1915,7 @@ EXPORT_SYMBOL_GPL(clk_set_parent);
> */
> int clk_set_phase(struct clk *clk, int degrees)
> {
> - int ret = -EINVAL;
> + int ret;
>
> if (!clk)
> return 0;
> @@ -1909,17 +1926,7 @@ int clk_set_phase(struct clk *clk, int degrees)
> degrees += 360;
>
> clk_prepare_lock();
> -
> - trace_clk_set_phase(clk->core, degrees);
> -
> - if (clk->core->ops->set_phase)
> - ret = clk->core->ops->set_phase(clk->core->hw, degrees);
> -
> - trace_clk_set_phase_complete(clk->core, degrees);
> -
> - if (!ret)
> - clk->core->phase = degrees;
> -
> + ret = clk_core_set_phase(clk->core, degrees);
> clk_prepare_unlock();
>
> return ret;
> --
> 2.9.3
>
next prev parent reply other threads:[~2017-05-11 18:24 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-21 18:33 [RFC 0/7] clk: implement clock locking mechanism Jerome Brunet
2017-03-21 18:33 ` [RFC 1/7] clk: take the prepare lock out of clk_core_set_parent Jerome Brunet
2017-05-11 18:23 ` Michael Turquette
2017-05-12 9:54 ` Jerome Brunet
2017-03-21 18:33 ` [RFC 2/7] clk: add set_phase core function Jerome Brunet
2017-05-11 18:24 ` Michael Turquette [this message]
2017-03-21 18:33 ` [RFC 3/7] clk: rework calls to round and determine rate callbacks Jerome Brunet
2017-05-11 18:23 ` Michael Turquette
2017-03-21 18:33 ` [RFC 4/7] clk: add support for clock protection Jerome Brunet
2017-05-11 19:05 ` Michael Turquette
2017-05-12 13:08 ` Jerome Brunet
2017-05-15 20:03 ` Michael Turquette
2017-05-11 19:07 ` Michael Turquette
2017-03-21 18:33 ` [RFC 5/7] clk: rollback set_rate_range changes on failure Jerome Brunet
2017-03-21 18:33 ` [RFC 6/7] clk: cosmetic changes to clk_summary debugfs entry Jerome Brunet
2017-03-21 18:33 ` [RFC 7/7] clk: fix incorrect usage of ENOSYS Jerome Brunet
2017-03-22 0:07 ` [RFC 0/7] clk: implement clock locking mechanism Michael Turquette
2017-03-22 18:13 ` Jerome Brunet
2017-05-11 18:23 ` Michael Turquette
2017-05-12 14:04 ` Jerome Brunet
2017-05-15 20:09 ` Michael Turquette
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=149228804557.88277.9328911897442773852@resonance \
--to=mturquette@baylibre.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®