From mboxrd@z Thu Jan  1 00:00:00 1970
From: jbrunet@baylibre.com (Jerome Brunet)
Date: Mon, 12 Jun 2017 11:42:57 +0200
Subject: [PATCH v4 5/7] ARM: dts: meson6: switch to new bindings for
 UART nodes
In-Reply-To: <1497001756-942-6-git-send-email-narmstrong@baylibre.com>
References: <1497001756-942-1-git-send-email-narmstrong@baylibre.com>
 <1497001756-942-6-git-send-email-narmstrong@baylibre.com>
Message-ID: <1497260577.3086.11.camel@baylibre.com>
To: linus-amlogic@lists.infradead.org
List-Id: linus-amlogic.lists.infradead.org

On Fri, 2017-06-09 at 11:49 +0200, Neil Armstrong wrote:
> Switch to the stable UART bindings by adding a XTAL node and using the
> proper compatible strings.
> 
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

Shouldn't this patch be squashed with patch 4 ?


> ---
> ?arch/arm/boot/dts/meson6.dtsi | 28 ++++++++++++++++++++++++++++
> ?1 file changed, 28 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/meson6.dtsi b/arch/arm/boot/dts/meson6.dtsi
> index b0fc91f..a334fbe 100644
> --- a/arch/arm/boot/dts/meson6.dtsi
> +++ b/arch/arm/boot/dts/meson6.dtsi
> @@ -70,9 +70,37 @@
> ?		};
> ?	};
> ?
> +	xtal: xtal-clk {
> +		compatible = "fixed-clock";
> +		clock-frequency = <24000000>;
> +		clock-output-names = "xtal";
> +		#clock-cells = <0>;
> +	};
> +
> ?	clk81: clk at 0 {
> ?		#clock-cells = <0>;
> ?		compatible = "fixed-clock";
> ?		clock-frequency = <200000000>;
> ?	};
> ?}; /* end of / */
> +
> +
> +&uart_AO {
> +	clocks = <&xtal>, <&clk81>, <&clk81>;
> +	clock-names = "xtal", "pclk", "baud";
> +};
> +
> +&uart_A {
> +	clocks = <&xtal>, <&clk81>, <&clk81>;
> +	clock-names = "xtal", "pclk", "baud";
> +};
> +
> +&uart_B {
> +	clocks = <&xtal>, <&clk81>, <&clk81>;
> +	clock-names = "xtal", "pclk", "baud";
> +};
> +
> +&uart_C {
> +	clocks = <&xtal>, <&clk81>, <&clk81>;
> +	clock-names = "xtal", "pclk", "baud";
> +};