mirror of https://lore.kernel.org/linux-amlogic/
 help / color / mirror / Atom feed
From: Neil Armstrong <neil.armstrong@linaro.org>
To: iav@iav.lv, Kevin Hilman <khilman@baylibre.com>,
	Jerome Brunet <jbrunet@baylibre.com>,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] arm64: dts: amlogic: meson-sm1-odroid: mark the Ethernet PHY as a wakeup source
Date: Mon, 9 Nov 2026 09:44:23 +0100	[thread overview]
Message-ID: <14a650ed-e409-402d-b278-5af4c6c0d6dd@linaro.org> (raw)
In-Reply-To: <20261109-hc4-phy-wakeup-v1-1-d98784ecac88@iav.lv>

On 11/9/26 01:57, Igor Velkov via B4 Relay wrote:
> From: Igor Velkov <iav@iav.lv>
> 
> The RTL8211F interrupt is wired to GPIOZ_14 and described in the PHY
> node, but the node does not declare that it can wake the board. Without
> wakeup-source the Realtek driver does not make the PHY wakeup capable,
> so phylink leaves Wake-on-LAN to the MAC, and a magic packet does not
> wake the board from s2idle.
> 
> Signed-off-by: Igor Velkov <iav@iav.lv>
> ---
> Tested on ODROID-HC4 with Linux 7.4-rc1 and the U-Boot and .config of
> Armbian: s2idle, Wake-on-LAN set with ethtool after the link is up. With
> this change a magic packet woke the board 5 of 5 times, in 8 s, with
> pm_wakeup_irq pointing at the PHY. Without it, 0 of 2: the RTC alarm
> woke the board.
> 
> The test DTB had two other changes: the RTC alarm interrupt [1] and PCIe
> disabled. With PCIe enabled the board did not resume 2 of 2. In the one
> console capture resume starts when the packet is sent, then a hard LOCKUP
> and a panic follow while pci_pm_resume_noirq() of the root port runs;
> pci-meson has no system PM. So on the HC4 with its stock DT this property
> alone does not give working Wake-on-LAN yet.
> 
> Not tested on ODROID-C4, which shares this node.
> 
> [1] https://lore.kernel.org/r/20261019-hc4-rtc-alarm-irq-v1-1-078fc79e596f@iav.lv
> ---
>   arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi | 1 +
>   1 file changed, 1 insertion(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
> index e6f02d738a21..9a4684dfbde3 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
> @@ -277,6 +277,7 @@ external_phy: ethernet-phy@0 {
>   		interrupt-parent = <&gpio_intc>;
>   		/* MAC_INTR on GPIOZ_14 */
>   		interrupts = <IRQID_GPIOZ_14 IRQ_TYPE_LEVEL_LOW>;
> +		wakeup-source;
>   	};
>   };
>   
> 
> ---
> base-commit: 81e55899e134541583a4e611ff750e1868671c67
> change-id: 20261109-hc4-phy-wakeup-9c15ebaa311e
> 
> Best regards,

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>

Thanks,
Neil

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

      reply	other threads:[~2026-11-09  8:44 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-09  0:57 Igor Velkov via B4 Relay
2026-11-09  8:44 ` Neil Armstrong [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=14a650ed-e409-402d-b278-5af4c6c0d6dd@linaro.org \
    --to=neil.armstrong@linaro.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=iav@iav.lv \
    --cc=jbrunet@baylibre.com \
    --cc=khilman@baylibre.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®