From mboxrd@z Thu Jan 1 00:00:00 1970 From: narmstrong@baylibre.com (Neil Armstrong) Date: Tue, 17 Oct 2017 10:29:11 +0200 Subject: [PATCH 4/4] ARM64: dts: odroid-c2: Add HDMI and CEC Nodes In-Reply-To: <1508228951-12384-1-git-send-email-narmstrong@baylibre.com> References: <1508228951-12384-1-git-send-email-narmstrong@baylibre.com> Message-ID: <1508228951-12384-5-git-send-email-narmstrong@baylibre.com> To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org Now the VPU Power Domain has been fixed while boothing from Mainline U-Boot, VPU and HDMI nodes can finally be added to the Odroid-C2 DTS. Signed-off-by: Neil Armstrong --- .../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 30 ++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index 1deaa53..ccf5640 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -135,6 +135,24 @@ compatible = "mmc-pwrseq-emmc"; reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; +}; + +&cec_AO { + status = "okay"; + pinctrl-0 = <&ao_cec_pins>; + pinctrl-names = "default"; + hdmi-phandle = <&hdmi_tx>; }; ðmac { @@ -177,6 +195,18 @@ }; }; +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; + &i2c_A { status = "okay"; pinctrl-0 = <&i2c_a_pins>; -- 2.7.4