From: narmstrong@baylibre.com (Neil Armstrong)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH u-boot v3 0/5] Add support for Amlogic GXL Based SBCs
Date: Mon, 27 Nov 2017 10:16:15 +0100 [thread overview]
Message-ID: <1511774180-22672-1-git-send-email-narmstrong@baylibre.com> (raw)
This patchset aimed to add minimal support for the following Amlogic GXL SoC
based board:
- LibreTech-CC
- Khadas VIM
The initial support is composed of :
- Minimal boot support with serial, MMC, Ethernet and SDCard
- Updated DTS from Linux 4.13.8
Commands to generate a valid binary are provided in the board README.
A common Ethernet init function is introduced to avoid duplicating
the same hardware init code.
The P212 and Odroid-C2 board are also converted to this common function
by this patchset.
The following work will be pushed later on :
- Support for dynamic reading of DDR memory size from registers
- USB DWC3 Host Support with PHY support
Changes since v2:
- added comment in eth.c and eth.h
- switch to flags to use the internal PHY on GXL
- updated the board files to use the flag instead
- switched the #if to if(IS_ENABLED()) to compile all code paths
- fixed the "u-boot" README typos
- Added Simon's tags
Changes since v1:
- Add common ethernet init function
- Switch P212 and Odroid-C2 to use this ethernet init function
- Fix typos in READMEs
- Drop #define CONFIG_CONS_INDEX
Neil Armstrong (5):
ARM: arch-meson: add ethernet common init function
board: odroid-c2: use common ethernet init function
board: p212: use common ethernet init function
arm: Add LibreTech CC support based on Meson GXL family
arm: Add Khadas VIM support based on Meson GXL family
arch/arm/dts/Makefile | 4 +-
arch/arm/dts/meson-gxl-s905x-khadas-vim.dts | 137 +++++++++++++++++++++
arch/arm/dts/meson-gxl-s905x-libretech-cc.dts | 171 ++++++++++++++++++++++++++
arch/arm/include/asm/arch-meson/eth.h | 23 ++++
arch/arm/mach-meson/Kconfig | 18 +++
arch/arm/mach-meson/Makefile | 2 +-
arch/arm/mach-meson/eth.c | 55 +++++++++
board/amlogic/khadas-vim/Kconfig | 12 ++
board/amlogic/khadas-vim/MAINTAINERS | 6 +
board/amlogic/khadas-vim/Makefile | 8 ++
board/amlogic/khadas-vim/README | 96 +++++++++++++++
board/amlogic/khadas-vim/khadas-vim.c | 49 ++++++++
board/amlogic/libretech-cc/Kconfig | 12 ++
board/amlogic/libretech-cc/MAINTAINERS | 6 +
board/amlogic/libretech-cc/Makefile | 8 ++
board/amlogic/libretech-cc/README | 96 +++++++++++++++
board/amlogic/libretech-cc/libretech-cc.c | 53 ++++++++
board/amlogic/odroid-c2/odroid-c2.c | 11 +-
board/amlogic/p212/p212.c | 14 +--
configs/khadas-vim_defconfig | 35 ++++++
configs/libretech-cc_defconfig | 35 ++++++
include/configs/khadas-vim.h | 21 ++++
include/configs/libretech-cc.h | 21 ++++
23 files changed, 870 insertions(+), 23 deletions(-)
create mode 100644 arch/arm/dts/meson-gxl-s905x-khadas-vim.dts
create mode 100644 arch/arm/dts/meson-gxl-s905x-libretech-cc.dts
create mode 100644 arch/arm/include/asm/arch-meson/eth.h
create mode 100644 arch/arm/mach-meson/eth.c
create mode 100644 board/amlogic/khadas-vim/Kconfig
create mode 100644 board/amlogic/khadas-vim/MAINTAINERS
create mode 100644 board/amlogic/khadas-vim/Makefile
create mode 100644 board/amlogic/khadas-vim/README
create mode 100644 board/amlogic/khadas-vim/khadas-vim.c
create mode 100644 board/amlogic/libretech-cc/Kconfig
create mode 100644 board/amlogic/libretech-cc/MAINTAINERS
create mode 100644 board/amlogic/libretech-cc/Makefile
create mode 100644 board/amlogic/libretech-cc/README
create mode 100644 board/amlogic/libretech-cc/libretech-cc.c
create mode 100644 configs/khadas-vim_defconfig
create mode 100644 configs/libretech-cc_defconfig
create mode 100644 include/configs/khadas-vim.h
create mode 100644 include/configs/libretech-cc.h
--
2.7.4
next reply other threads:[~2017-11-27 9:16 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-27 9:16 Neil Armstrong [this message]
2017-11-27 9:16 ` [PATCH u-boot v3 1/5] ARM: arch-meson: add ethernet common init function Neil Armstrong
2017-12-04 18:36 ` [U-Boot, u-boot, v3, " Tom Rini
2017-11-27 9:16 ` [PATCH u-boot v3 2/5] board: odroid-c2: use common ethernet " Neil Armstrong
2017-12-04 18:36 ` [U-Boot, u-boot, v3, " Tom Rini
2017-11-27 9:16 ` [PATCH u-boot v3 3/5] board: p212: " Neil Armstrong
2017-12-04 18:36 ` [U-Boot, u-boot, v3, " Tom Rini
2017-11-27 9:16 ` [PATCH u-boot v3 4/5] arm: Add LibreTech CC support based on Meson GXL family Neil Armstrong
2017-12-04 18:36 ` [U-Boot, u-boot, v3, " Tom Rini
2017-11-27 9:16 ` [PATCH u-boot v3 5/5] arm: Add Khadas VIM " Neil Armstrong
2017-12-04 18:36 ` [U-Boot, u-boot, v3, " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1511774180-22672-1-git-send-email-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®