From: claudiu.beznea@microchip.com (Claudiu Beznea)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH v2 06/16] ARM: dts: pxa: update pwm-cells
Date: Fri, 12 Jan 2018 16:22:53 +0200 [thread overview]
Message-ID: <1515766983-15151-7-git-send-email-claudiu.beznea@microchip.com> (raw)
In-Reply-To: <1515766983-15151-1-git-send-email-claudiu.beznea@microchip.com>
Update pwm-cells to 2 to allow initialization of channel number an period.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
arch/arm/boot/dts/pxa25x.dtsi | 4 ++--
arch/arm/boot/dts/pxa27x.dtsi | 8 ++++----
arch/arm/boot/dts/pxa3xx.dtsi | 8 ++++----
3 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/pxa25x.dtsi b/arch/arm/boot/dts/pxa25x.dtsi
index 95d59be97213..8c55b3552c42 100644
--- a/arch/arm/boot/dts/pxa25x.dtsi
+++ b/arch/arm/boot/dts/pxa25x.dtsi
@@ -70,14 +70,14 @@
pwm0: pwm at 40b00000 {
compatible = "marvell,pxa250-pwm";
reg = <0x40b00000 0x10>;
- #pwm-cells = <1>;
+ #pwm-cells = <2>;
clocks = <&clks CLK_PWM0>;
};
pwm1: pwm at 40b00010 {
compatible = "marvell,pxa250-pwm";
reg = <0x40b00010 0x10>;
- #pwm-cells = <1>;
+ #pwm-cells = <2>;
clocks = <&clks CLK_PWM1>;
};
};
diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi
index 747f750f675d..e3db171cfeb1 100644
--- a/arch/arm/boot/dts/pxa27x.dtsi
+++ b/arch/arm/boot/dts/pxa27x.dtsi
@@ -46,28 +46,28 @@
pwm0: pwm at 40b00000 {
compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
reg = <0x40b00000 0x10>;
- #pwm-cells = <1>;
+ #pwm-cells = <2>;
clocks = <&clks CLK_PWM0>;
};
pwm1: pwm at 40b00010 {
compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
reg = <0x40b00010 0x10>;
- #pwm-cells = <1>;
+ #pwm-cells = <2>;
clocks = <&clks CLK_PWM1>;
};
pwm2: pwm at 40c00000 {
compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
reg = <0x40c00000 0x10>;
- #pwm-cells = <1>;
+ #pwm-cells = <2>;
clocks = <&clks CLK_PWM0>;
};
pwm3: pwm at 40c00010 {
compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm";
reg = <0x40c00010 0x10>;
- #pwm-cells = <1>;
+ #pwm-cells = <2>;
clocks = <&clks CLK_PWM1>;
};
diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi
index 55c75b67351c..1f37295b05a3 100644
--- a/arch/arm/boot/dts/pxa3xx.dtsi
+++ b/arch/arm/boot/dts/pxa3xx.dtsi
@@ -200,7 +200,7 @@
pwm0: pwm at 40b00000 {
compatible = "marvell,pxa270-pwm";
reg = <0x40b00000 0x10>;
- #pwm-cells = <1>;
+ #pwm-cells = <2>;
clocks = <&clks CLK_PWM0>;
status = "disabled";
};
@@ -208,7 +208,7 @@
pwm1: pwm at 40b00010 {
compatible = "marvell,pxa270-pwm";
reg = <0x40b00010 0x10>;
- #pwm-cells = <1>;
+ #pwm-cells = <2>;
clocks = <&clks CLK_PWM1>;
status = "disabled";
};
@@ -216,7 +216,7 @@
pwm2: pwm at 40c00000 {
compatible = "marvell,pxa270-pwm";
reg = <0x40c00000 0x10>;
- #pwm-cells = <1>;
+ #pwm-cells = <2>;
clocks = <&clks CLK_PWM0>;
status = "disabled";
};
@@ -224,7 +224,7 @@
pwm3: pwm at 40c00010 {
compatible = "marvell,pxa270-pwm";
reg = <0x40c00010 0x10>;
- #pwm-cells = <1>;
+ #pwm-cells = <2>;
clocks = <&clks CLK_PWM1>;
status = "disabled";
};
--
2.7.4
next prev parent reply other threads:[~2018-01-12 14:22 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-12 14:22 [PATCH v2 00/16] extend PWM framework to support PWM modes Claudiu Beznea
2018-01-12 14:22 ` [PATCH v2 01/16] drivers: pwm: core: use a single of xlate function Claudiu Beznea
2018-01-12 18:35 ` Brian Norris
2018-01-15 8:41 ` Claudiu Beznea
2018-01-15 12:43 ` Claudiu Beznea
2018-01-15 20:27 ` Andy Shevchenko
[not found] ` <9a130c0b-572d-be0b-8ac7-596714208d41@microchip.com>
2018-01-17 23:14 ` Brian Norris
2018-01-18 9:11 ` Claudiu Beznea
2018-01-12 14:22 ` [PATCH v2 02/16] pwm: pxa: update documentation regarding pwm-cells Claudiu Beznea
2018-01-19 22:30 ` Rob Herring
2018-01-22 8:47 ` Claudiu Beznea
2018-01-12 14:22 ` [PATCH v2 03/16] pwm: cros-ec: " Claudiu Beznea
2018-01-12 18:31 ` Brian Norris
2018-01-15 9:01 ` Claudiu Beznea
2018-01-17 8:29 ` Claudiu Beznea
2018-01-17 23:10 ` Brian Norris
2018-01-18 9:18 ` Claudiu Beznea
2018-01-12 14:22 ` [PATCH v2 04/16] pwm: clps711x: " Claudiu Beznea
2018-01-12 14:22 ` [PATCH v2 05/16] ARM: dts: clps711x: update pwm-cells Claudiu Beznea
2018-01-12 14:22 ` Claudiu Beznea [this message]
2018-01-12 14:22 ` [PATCH v2 07/16] arm64: dts: rockchip: " Claudiu Beznea
2018-01-12 14:22 ` [PATCH v2 08/16] drivers: pwm: core: extend PWM framework with PWM modes Claudiu Beznea
2018-01-12 14:22 ` [PATCH v2 09/16] drivers: pwm: core: add PWM mode to pwm_config() Claudiu Beznea
2018-01-12 14:22 ` [PATCH v2 10/16] pwm: Add PWM modes Claudiu Beznea
2018-01-19 22:34 ` Rob Herring
2018-01-22 8:54 ` Claudiu Beznea
2018-01-22 18:12 ` Rob Herring
2018-01-23 10:40 ` Claudiu Beznea
2018-01-23 15:21 ` Rob Herring
2018-01-23 16:55 ` Claudiu Beznea
2018-01-12 14:22 ` [PATCH v2 11/16] pwm: add documentation for " Claudiu Beznea
2018-01-19 22:39 ` Rob Herring
2018-01-22 8:55 ` Claudiu Beznea
2018-01-12 14:22 ` [PATCH v2 12/16] pwm: atmel: add pwm capabilities Claudiu Beznea
2018-01-12 14:23 ` [PATCH v2 13/16] drivers: pwm: core: add push-pull mode support Claudiu Beznea
2018-01-12 14:23 ` [PATCH v2 14/16] pwm: add push-pull mode Claudiu Beznea
2018-01-12 14:23 ` [PATCH v2 15/16] pwm: add documentation for pwm " Claudiu Beznea
2018-01-19 22:41 ` Rob Herring
2018-01-12 14:23 ` [PATCH v2 16/16] pwm: atmel: add push-pull mode support Claudiu Beznea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1515766983-15151-7-git-send-email-claudiu.beznea@microchip.com \
--to=claudiu.beznea@microchip.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®