From mboxrd@z Thu Jan 1 00:00:00 1970 From: sboyd@kernel.org (Stephen Boyd) Date: Sat, 03 Nov 2018 20:02:43 -0700 Subject: [PATCH v6 1/3] clk: meson: add emmc sub clock phase delay driver In-Reply-To: <1541089855-19356-2-git-send-email-jianxin.pan@amlogic.com> References: <1541089855-19356-1-git-send-email-jianxin.pan@amlogic.com> <1541089855-19356-2-git-send-email-jianxin.pan@amlogic.com> Message-ID: <154130056376.88331.17004780065573288593@swboyd.mtv.corp.google.com> To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org Quoting Jianxin Pan (2018-11-01 09:30:53) > diff --git a/drivers/clk/meson/clk-phase-delay.c b/drivers/clk/meson/clk-phase-delay.c > new file mode 100644 > index 0000000..83e74ed > --- /dev/null > +++ b/drivers/clk/meson/clk-phase-delay.c > @@ -0,0 +1,66 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Amlogic Meson MMC Sub Clock Controller Driver > + * > + * Copyright (c) 2017 Baylibre SAS. > + * Author: Jerome Brunet > + * > + * Copyright (c) 2018 Amlogic, inc. > + * Author: Yixun Lan > + * Author: Jianxin Pan > + */ > + > +#include > +#include "clkc.h" > + > +static int meson_clk_phase_delay_get_phase(struct clk_hw *hw) > +{ > + struct clk_regmap *clk = to_clk_regmap(hw); > + struct meson_clk_phase_delay_data *ph = > + meson_clk_get_phase_delay_data(clk); Nitpick: Do this after declaring variables because it splits a line. > + unsigned long period_ps, p, d; > + int degrees; > + > + p = meson_parm_read(clk->map, &ph->phase); > + degrees = p * 360 / (1 << (ph->phase.width)); Nitpick: Remove useless parenthesis. > + > + period_ps = DIV_ROUND_UP((unsigned long)NSEC_PER_SEC * 1000, Is the cast necessary? > + clk_hw_get_rate(hw)); > + > + d = meson_parm_read(clk->map, &ph->delay); > + degrees += d * ph->delay_step_ps * 360 / period_ps; > + degrees %= 360; > + > + return degrees; > +} > + > +static int meson_clk_phase_delay_set_phase(struct clk_hw *hw, int degrees) > +{ > + struct clk_regmap *clk = to_clk_regmap(hw); > + struct meson_clk_phase_delay_data *ph = > + meson_clk_get_phase_delay_data(clk); > + unsigned long period_ps, d = 0, r; > + u64 p; > + > + p = degrees % 360; We don't allow phase to be larger than 360 so this isn't needed. > + period_ps = DIV_ROUND_UP((unsigned long)NSEC_PER_SEC * 1000, Drop the cast? > + clk_hw_get_rate(hw)); > + > + /* First compute the phase index (p), the remainder (r) is the Nitpick: Please leave /* on it's own line. > + * part we'll try to acheive using the delays (d). > + */ > + r = do_div(p, 360 / (1 << (ph->phase.width))); Drop useless parenthesis please. > + d = DIV_ROUND_CLOSEST(r * period_ps, > + 360 * ph->delay_step_ps); > + d = min(d, PMASK(ph->delay.width)); > + > + meson_parm_write(clk->map, &ph->phase, p); > + meson_parm_write(clk->map, &ph->delay, d); > + return 0; > +}