From mboxrd@z Thu Jan  1 00:00:00 1970
From: narmstrong@baylibre.com (Neil Armstrong)
Date: Thu, 29 Mar 2018 16:23:48 +0200
Subject: [PATCH u-boot 2/3] usb: host: dwc3: Add support for multiple PHYs
In-Reply-To: <630e8bba-a5d8-2965-98a3-34ca8ed2c868@denx.de>
References: <1522330940-25062-1-git-send-email-narmstrong@baylibre.com>
 <1522330940-25062-3-git-send-email-narmstrong@baylibre.com>
 <630e8bba-a5d8-2965-98a3-34ca8ed2c868@denx.de>
Message-ID: <19da48b5-c314-1a8a-e3e4-de1107b196e8@baylibre.com>
To: linus-amlogic@lists.infradead.org
List-Id: linus-amlogic.lists.infradead.org

On 29/03/2018 15:53, Marek Vasut wrote:
> On 03/29/2018 03:42 PM, Neil Armstrong wrote:
>> DWC3 Ips can have more than 1 PHY for USB2 and 1 PHY for USB3, add support
>> for a generic number of PHYs and adapt the code to handle a generic
>> number of PHYs.
>>
>> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
>> ---
>>  drivers/usb/host/xhci-dwc3.c | 105 ++++++++++++++++++++++++-------------------
>>  1 file changed, 58 insertions(+), 47 deletions(-)
>>
>> diff --git a/drivers/usb/host/xhci-dwc3.c b/drivers/usb/host/xhci-dwc3.c
>> index 1022dd5..da29162 100644
>> --- a/drivers/usb/host/xhci-dwc3.c
>> +++ b/drivers/usb/host/xhci-dwc3.c
>> @@ -22,8 +22,8 @@
>>  DECLARE_GLOBAL_DATA_PTR;
>>  
>>  struct xhci_dwc3_platdata {
>> -	struct phy usb_phy;
>> -	struct phy usb3_phy;
>> +	struct phy *usb_phys;
>> +	int num_phys;
>>  };
>>  
>>  void dwc3_set_mode(struct dwc3 *dwc3_reg, u32 mode)
>> @@ -113,45 +113,74 @@ void dwc3_set_fladj(struct dwc3 *dwc3_reg, u32 val)
>>  }
>>  
>>  #ifdef CONFIG_DM_USB
>> -static int xhci_dwc3_setup_phy(struct udevice *dev, int index, struct phy *phy)
>> +static int xhci_dwc3_setup_phy(struct udevice *dev, int count)
>>  {
>> -	int ret = 0;
>> +	struct xhci_dwc3_platdata *plat = dev_get_platdata(dev);
>> +	int i, ret;
>> +
>> +	if (!count)
>> +		return 0;
>>  
>> -	ret = generic_phy_get_by_index(dev, index, phy);
>> -	if (ret) {
>> -		if (ret != -ENOENT) {
>> -			pr_err("Failed to get USB PHY for %s\n", dev->name);
>> +	plat->usb_phys = devm_kcalloc(dev, count, sizeof(struct phy),
>> +					GFP_KERNEL);
>> +	if (!plat->usb_phys)
>> +		return -ENOMEM;
>> +
>> +	for (i = 0; i < count; i++) {
>> +		ret = generic_phy_get_by_index(dev, i, &plat->usb_phys[i]);
>> +		if (ret && ret != -ENOENT) {
>> +			pr_err("Failed to get USB PHY%d for %s\n",
>> +			       i, dev->name);
>>  			return ret;
>>  		}
>> -	} else {
>> -		ret = generic_phy_init(phy);
>> +
>> +		++plat->num_phys;
>> +	}
>> +	
>> +	for (i = 0; i < plat->num_phys; i++) {
>> +		ret = generic_phy_init(&plat->usb_phys[i]);
>>  		if (ret) {
>> -			pr_err("Can't init USB PHY for %s\n", dev->name);
>> -			return ret;
>> +			pr_err("Can't init USB PHY%d for %s\n",
>> +			       i, dev->name);
>> +			goto phys_err;
>>  		}
>> -		ret = generic_phy_power_on(phy);
>> +	}
>> +	
>> +	for (i = 0; i < plat->num_phys; i++) {
>> +		ret = generic_phy_power_on(&plat->usb_phys[i]);
>>  		if (ret) {
>> -			pr_err("Can't power on USB PHY for %s\n", dev->name);
>> -			generic_phy_exit(phy);
>> -			return ret;
>> +			pr_err("Can't power USB PHY%d for %s\n",
>> +			       i, dev->name);
>> +			goto phys_err;
>>  		}
>>  	}
>>  
>>  	return 0;
>> +
>> +phys_err:
>> +	for (; i >= 0; i--) {
>> +		generic_phy_power_off(&plat->usb_phys[i]);
>> +		generic_phy_exit(&plat->usb_phys[i]);
>> +	}
> 
> This will not work if all the PHYs are inited, but the power up function
> fails -- at that point the phy_exit will not be called for all inited PHys.
> 

Ok will split in 2 parts.

Neil