From: Neil Armstrong <neil.armstrong@linaro.org>
To: soc@kernel.org, arm@kernel.org
Cc: linux-amlogic@lists.infradead.org, linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] amlogic ARM64 DT updates for v6.4
Date: Tue, 4 Apr 2023 11:23:49 +0200 [thread overview]
Message-ID: <1b955bb7-1a35-8d67-beb6-dd289533ff6f@linaro.org> (raw)
Hi,
Here's a set of Amlogic ARM64 DT changeset for v6.4.
New boards are added:
- BananaPi M2S, which can be mounted with pin2pin compatibles A311D or S922X SoCs
- BPI-CM4 module with BPI-CM4IO baseboard, a RPI CM4 compatible module & baseboard
The other changes are DT fixes for dt-schema checks, gpio_intc for A1, new GXL MDIO
multiplexer for GXL and audio & bluetooth support on gxbb-kii-pro.
Neil
The following changes since commit fe15c26ee26efa11741a7b632e9f23b01aca4cc6:
Linux 6.3-rc1 (2023-03-05 14:52:03 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux.git tags/amlogic-arm64-dt-for-v6.4
for you to fetch changes up to 0262f2736978b1763363224698f47112a148dab0:
arm64: dts: amlogic: Add initial support for BPI-CM4 module with BPI-CM4IO baseboard (2023-03-07 09:02:03 +0100)
----------------------------------------------------------------
Amlogic ARM64 DT changes for v6.4:
- set of DT bindings check fixes
- adjust order of some compatibles to match dt-schema migration
- add support for BananaPi M2S variants
- gxbb-kii-pro: add audio & bluetooth support
- meson-a1: add gpio_intc node
- gxl: use gxl mdio multiplexer
- Add initial support for BPI-CM4 module with BPI-CM4IO baseboard
----------------------------------------------------------------
Alexey Romanov (1):
arm64: dts: meson-a1: add gpio_intc node
Christian Hewitt (5):
dt-bindings: arm: amlogic: add support for BananaPi M2S variants
arm64: dts: meson: add support for BananaPi M2S variants
arm64: dts: meson: gxbb-kii-pro: sort and tidy the dts
arm64: dts: meson: gxbb-kii-pro: complete the bluetooth node
arm64: dts: meson: gxbb-kii-pro: add initial audio support
Heiner Kallweit (1):
arm64: dts: meson: adjust order of some compatibles
Jerome Brunet (1):
arm64: dts: amlogic: gxl: use gxl mdio multiplexer
Neil Armstrong (10):
arm64: dts: amlogic: meson-sm1-bananapi: correct usb-hub hog node name
arm64: dts: amlogic: meson-gxm-s912-libretech-pc: add simple connector node in fusb302 node
arm64: dts: amlogic: meson-axg-jethome-jethub-j1xx: remove invalid #gpio-cells in onewire node
arm64: dts: amlogic: meson-g12b-radxa-zero2: fix pwm clock names
arm64: dts: amlogic: meson-g12b-odroid-go-ultra: rename keypad-gpio pinctrl node
arm64: dts: amlogic: meson-s4: fix apb4 bus node name
arm64: dts: amlogic: meson-sm1: use correct enable-gpios
arm64: dts: amlogic: meson-gxm-s912-libretech-pc: remove unused pinctrl-names from phy node
dt-bindings: arm: amlogic: Document the boards with the BPI-CM4 connected
arm64: dts: amlogic: Add initial support for BPI-CM4 module with BPI-CM4IO baseboard
Documentation/devicetree/bindings/arm/amlogic.yaml | 10 +
arch/arm64/boot/dts/amlogic/Makefile | 3 +
arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 10 +
.../dts/amlogic/meson-axg-jethome-jethub-j1xx.dtsi | 1 -
.../dts/amlogic/meson-g12b-a311d-bananapi-m2s.dts | 37 ++
.../dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts | 165 +++++++
.../boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi | 388 +++++++++++++++
.../boot/dts/amlogic/meson-g12b-bananapi.dtsi | 521 +++++++++++++++++++++
.../dts/amlogic/meson-g12b-odroid-go-ultra.dts | 2 +-
.../boot/dts/amlogic/meson-g12b-radxa-zero2.dts | 6 +-
.../dts/amlogic/meson-g12b-s922x-bananapi-m2s.dts | 14 +
arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts | 82 +++-
arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 4 +-
.../amlogic/meson-gxl-s905x-libretech-cc-v2.dts | 1 -
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 29 +-
.../dts/amlogic/meson-gxm-s912-libretech-pc.dts | 4 +
arch/arm64/boot/dts/amlogic/meson-s4.dtsi | 2 +-
.../arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi | 4 +-
arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi | 2 +-
19 files changed, 1248 insertions(+), 37 deletions(-)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-a311d-bananapi-m2s.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4-cm4io.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-bananapi-cm4.dtsi
create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-bananapi.dtsi
create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-s922x-bananapi-m2s.dts
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
reply other threads:[~2023-04-04 9:24 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1b955bb7-1a35-8d67-beb6-dd289533ff6f@linaro.org \
--to=neil.armstrong@linaro.org \
--cc=arm@kernel.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=soc@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®