Re: [PATCH v4 2/6] dt-bindings: pwm: amlogic: add new compatible for meson8 pwm type

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: "Jerome Brunet" <jbrunet@baylibre.com>,
	"Thierry Reding" <thierry.reding@gmail.com>,
	"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
	"Neil Armstrong" <neil.armstrong@linaro.org>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
	"Conor Dooley" <conor+dt@kernel.org>
Cc: Kevin Hilman <khilman@baylibre.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-amlogic@lists.infradead.org, linux-pwm@vger.kernel.org,
	JunYi Zhao <junyi.zhao@amlogic.com>
Subject: Re: [PATCH v4 2/6] dt-bindings: pwm: amlogic: add new compatible for meson8 pwm type
Date: Sat, 23 Dec 2023 15:02:29 +0100	[thread overview]
Message-ID: <1d09b9bf-5709-410c-a598-9188a32e1bea@linaro.org> (raw)
In-Reply-To: <20231222111658.832167-3-jbrunet@baylibre.com>

On 22/12/2023 12:16, Jerome Brunet wrote:
> Add a new compatible for the pwm found in the meson8 to sm1 Amlogic SoCs,
> dealing with clocks differently. This does not enable new HW. It is meant
> to fix a bad DT ABI for the currently supported HW.
> 
> The original clock bindings describe which input the PWM channel
> multiplexer should pick among its possible parents, which are
> hard-coded in the driver. As such, it is a setting tied to the driver
> implementation and does not describe the HW.
> 
> The new bindings introduce here describe the clocks input of the PWM block
> as they exist.
> 
> The old compatible is deprecated but kept to maintain ABI compatibility.
> 
> The SoC specific compatibles introduced match the SoC families supported
> by the original bindings.
> 
> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
> ---
>  .../devicetree/bindings/pwm/pwm-amlogic.yaml  | 50 +++++++++++++++++--
>  1 file changed, 46 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/pwm/pwm-amlogic.yaml b/Documentation/devicetree/bindings/pwm/pwm-amlogic.yaml
> index a1d382aacb82..eece390114a3 100644
> --- a/Documentation/devicetree/bindings/pwm/pwm-amlogic.yaml
> +++ b/Documentation/devicetree/bindings/pwm/pwm-amlogic.yaml
> @@ -21,23 +21,35 @@ properties:
>            - amlogic,meson-g12a-ee-pwm
>            - amlogic,meson-g12a-ao-pwm-ab
>            - amlogic,meson-g12a-ao-pwm-cd
> -          - amlogic,meson-s4-pwm
> +        deprecated: true
>        - items:
>            - const: amlogic,meson-gx-pwm
>            - const: amlogic,meson-gxbb-pwm
> +        deprecated: true
>        - items:
>            - const: amlogic,meson-gx-ao-pwm
>            - const: amlogic,meson-gxbb-ao-pwm
> +        deprecated: true
>        - items:
>            - const: amlogic,meson8-pwm
>            - const: amlogic,meson8b-pwm
> +        deprecated: true
> +      - const: amlogic,meson8-pwm-v2
> +      - items:
> +          - enum:
> +              - amlogic,meson8b-pwm-v2
> +              - amlogic,meson-gxbb-pwm-v2
> +              - amlogic,meson-axg-pwm-v2
> +              - amlogic,meson-g12-pwm-v2
> +          - const: amlogic,meson8-pwm-v2
> +      - const: amlogic,meson-s4-pwm

If there is going to be resend:
This and amlogic,meson8-pwm-v2 before items: should be just in enum,
it's easier to read.

>  
>    reg:
>      maxItems: 1
>  
>    clocks:
>      minItems: 1
> -    maxItems: 2
> +    maxItems: 4
>  
>    clock-names:
>      minItems: 1
> @@ -58,7 +70,6 @@ allOf:
>          compatible:
>            contains:
>              enum:
> -              - amlogic,meson8-pwm

I don't understand why removing it here.

The rest looks ok.
Best regards,
Krzysztof

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic