[PATCH 1/3] dt-bindings: display: dw_hdmi.txt

[narmstrong@baylibre.com (Neil Armstrong)]

On 19/03/2018 12:43, Hans Verkuil wrote:
> From: Hans Verkuil <hans.verkuil@cisco.com>
> 
> Some boards have both a DesignWare and their own CEC controller.
> The CEC pin is only hooked up to their own CEC controller and not
> to the DW controller.
> 
> Add the cec-disable property to disable the DW CEC controller.
> 
> This particular situation happens on Amlogic boards that have their
> own meson CEC controller.
> 
> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
> ---
>  Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt b/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt
> index 33bf981fbe33..4a13f4858bc0 100644
> --- a/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt
> +++ b/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt
> @@ -27,6 +27,9 @@ responsible for defining whether each property is required or optional.
>    - "isfr" is the internal register configuration clock (mandatory).
>    - "cec" is the HDMI CEC controller main clock (optional).
>  
> +- cec-disable: Do not use the DWC CEC controller since the CEC line is not
> +  hooked up even though the CEC DWC IP is present.
> +
>  - ports: The connectivity of the DWC HDMI TX with the rest of the system is
>    expressed in using ports as specified in the device graph bindings defined
>    in Documentation/devicetree/bindings/graph.txt. The numbering of the ports
> 

Acked-by: Neil Armstrong <narmstrong@baylibre.com>