mirror of https://lore.kernel.org/linux-amlogic/
 help / color / mirror / Atom feed
From: Jerome Brunet <jbrunet@baylibre.com>
To: Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	narmstrong@baylibre.com, linux-amlogic@lists.infradead.org
Cc: sboyd@kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org
Subject: Re: [PATCH v3 0/2] add the DDR clock controller on Meson8 and Meson8b
Date: Mon, 18 Nov 2019 10:55:26 +0100	[thread overview]
Message-ID: <1j7e3xpkz5.fsf@starbuckisacylon.baylibre.com> (raw)
In-Reply-To: <20191117140731.137378-1-martin.blumenstingl@googlemail.com>


On Sun 17 Nov 2019 at 15:07, Martin Blumenstingl <martin.blumenstingl@googlemail.com> wrote:

> Meson8 and Meson8b SoCs embed a DDR clock controller in their MMCBUS
> registers. This series:
> - adds support for this DDR clock controller (patches 0 and 1)
> - wires up the DDR PLL as input for two audio clocks (patches 2 and 3)
> - adds the DDR clock controller to meson8.dtsi and meson8b.dtsi
>
> Special thanks go out to Alexandre Mergnat for switching the Amlogic
> clock drivers over to parent_hws and parent_data. That made this series
> a lot easier for me!
>
> This series depends on v3 my other series from [0]:
> "provide the XTAL clock via OF on Meson8/8b/8m2"
>
>
> Changes since v2 at [2]:
> - add #include <linux/clk-provider.h> as suggested by Stephen Boyd
> - drop unused includes
> - use devm_platform_ioremap_resource instead of open-coding it as
>   suggested by Stephen Boyd
> - drop trailing comma after sentinel element as suggested by Stephen
>   Boyd
> - dropped patch #3 "clk: meson: meson8b: use of_clk_hw_register to
>   register the clocks" because it's now moved to my other series at
>   [0]
> - dropped dts changes so this series exclusively targets clk-meson
>
> Changes since v1 at [1]:
> - fixed the license of the .yaml binding and added Rob's Reviewed-by
> - drop unused syscon.h include (spotted by Jerome - thanks)
> - drop fast_io from regmap_config and add max_register as suggested
>   by Jerome
> - dropped original patch #4 "clk: meson: meson8b: add the ddr_pll
>   input for the audio clocks" because I could not test that yet (that
>   patch was a forward-port from Amlogic's 3.10 BSP kernel)
>
>
> [0] https://patchwork.kernel.org/cover/11248377/
> [1] https://patchwork.kernel.org/cover/11155553/
> [2] https://patchwork.kernel.org/cover/11214227/
>
>
> Martin Blumenstingl (2):
>   dt-bindings: clock: add the Amlogic Meson8 DDR clock controller
>     binding
>   clk: meson: add a driver for the Meson8/8b/8m2 DDR clock controller
>
>  .../clock/amlogic,meson8-ddr-clkc.yaml        |  50 ++++++
>  drivers/clk/meson/Makefile                    |   2 +-
>  drivers/clk/meson/meson8-ddr.c                | 149 ++++++++++++++++++
>  include/dt-bindings/clock/meson8-ddr-clkc.h   |   4 +
>  4 files changed, 204 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/clock/amlogic,meson8-ddr-clkc.yaml
>  create mode 100644 drivers/clk/meson/meson8-ddr.c
>  create mode 100644 include/dt-bindings/clock/meson8-ddr-clkc.h

Applied for v5.6
Please note this will get rebased once v5.5-rc1 is out


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

      parent reply	other threads:[~2019-11-18  9:55 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-17 14:07 Martin Blumenstingl
2019-11-17 14:07 ` [PATCH v3 1/2] dt-bindings: clock: add the Amlogic Meson8 DDR clock controller binding Martin Blumenstingl
2019-11-17 14:07 ` [PATCH v3 2/2] clk: meson: add a driver for the Meson8/8b/8m2 DDR clock controller Martin Blumenstingl
2019-11-18  9:55 ` Jerome Brunet [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1j7e3xpkz5.fsf@starbuckisacylon.baylibre.com \
    --to=jbrunet@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=narmstrong@baylibre.com \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®