From mboxrd@z Thu Jan 1 00:00:00 1970 From: martin.blumenstingl@googlemail.com (Martin Blumenstingl) Date: Tue, 28 Jun 2016 21:17:59 +0200 Subject: [PATCH v3 1/4] dt-bindings: media: meson-ir: Add Meson8b and GXBB compatible strings In-Reply-To: <20160628191802.21227-1-martin.blumenstingl@googlemail.com> References: <20160626210622.5257-1-martin.blumenstingl@googlemail.com> <20160628191802.21227-1-martin.blumenstingl@googlemail.com> Message-ID: <20160628191802.21227-2-martin.blumenstingl@googlemail.com> To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org From: Neil Armstrong New bindings are needed as the register layout on the newer platforms is slightly different compared to Meson6b. Signed-off-by: Neil Armstrong Signed-off-by: Martin Blumenstingl --- Documentation/devicetree/bindings/media/meson-ir.txt | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/media/meson-ir.txt b/Documentation/devicetree/bindings/media/meson-ir.txt index 407848e..e7e3f3c 100644 --- a/Documentation/devicetree/bindings/media/meson-ir.txt +++ b/Documentation/devicetree/bindings/media/meson-ir.txt @@ -1,7 +1,10 @@ * Amlogic Meson IR remote control receiver Required properties: - - compatible : should be "amlogic,meson6-ir" + - compatible : depending on the platform this should be one of: + - "amlogic,meson6-ir" + - "amlogic,meson8b-ir" + - "amlogic,meson-gxbb-ir" - reg : physical base address and length of the device registers - interrupts : a single specifier for the interrupt from the device -- 2.9.0