From mboxrd@z Thu Jan 1 00:00:00 1970 From: martin.blumenstingl@googlemail.com (Martin Blumenstingl) Date: Sat, 12 Nov 2016 14:13:05 +0100 Subject: [PATCH 3/3] ARM64: dts: meson-gxbb: add the USB reset also to the second USB PHY In-Reply-To: <20161112131305.26088-1-martin.blumenstingl@googlemail.com> References: <20161001152134.8168-1-martin.blumenstingl@googlemail.com> <20161112131305.26088-1-martin.blumenstingl@googlemail.com> Message-ID: <20161112131305.26088-4-martin.blumenstingl@googlemail.com> To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org When the USB PHY driver was introduced the reset framework did not have support for triggering a reset pulse for shared resets. On GXBB however there is only one reset line for both PHYs (meaning we have a shared reset line). With the latest changes to the reset framework and the corresponding updates to the phy-meson8b-usb2 driver we can now pass the reset to the second PHY as well. Signed-off-by: Martin Blumenstingl --- arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index 719bf50..a548663 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -87,6 +87,7 @@ compatible = "amlogic,meson-gxbb-usb2-phy"; #phy-cells = <0>; reg = <0x0 0xc0000020 0x0 0x20>; + resets = <&reset RESET_USB_OTG>; clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>; clock-names = "usb_general", "usb"; status = "disabled"; -- 2.10.2