From mboxrd@z Thu Jan 1 00:00:00 1970 From: martin.blumenstingl@googlemail.com (Martin Blumenstingl) Date: Sun, 19 Feb 2017 22:41:49 +0100 Subject: [PATCH v5 9/9] ARM64: dts: meson-gx: remove the phy-mode property from meson-gx In-Reply-To: <20170219214149.30418-1-martin.blumenstingl@googlemail.com> References: <20170122181028.5014-1-martin.blumenstingl@googlemail.com> <20170219214149.30418-1-martin.blumenstingl@googlemail.com> Message-ID: <20170219214149.30418-10-martin.blumenstingl@googlemail.com> To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org The ethmac node has to be configured for each board due to different pinctrl nodes for RGMII/RMII. Thus the phy-mode should be specified at the same place (= in the board .dts), making it easier to read the board .dts file (because the phy-mode is stated explicitly, without requiring developers to read all "parent" .dtsi as well). Signed-off-by: Martin Blumenstingl --- arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 5d995f7724af..d544b8f2ffbf 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -410,7 +410,6 @@ 0x0 0xc8834540 0x0 0x4>; interrupts = <0 8 1>; interrupt-names = "macirq"; - phy-mode = "rgmii"; status = "disabled"; }; -- 2.11.1