[PATCH 0/3] Khadas VIM support (Amlogic Meson GXL S905X)

[martin.blumenstingl@googlemail.com (Martin Blumenstingl)]

This series adds support for the Khadas VIM and Khadas VIM Pro boards
(both are provided through a single .dts as the only two differences are
the eMMC size and different SDIO WIFI chips - both are Broadcom brcmfmac
based though).
More details can be found on the official website: [0]

I have tested this on a Khadas VIM Pro board. It would be nice if someone
with a non-Pro board could give it a try as well.


This patchset depends on:
- "ARM64: defconfig: enable the leds-pwm driver and default-on trigger"
  see [1] - already merged in v4.12/defconfig of Kevin's Amlogic tree
- "meson-gxl pinctrl - add the missing PWM pins" see [2]
- "brcmfmac: add support for BCM43455 with modalias sdio:c00v02D0dA9BF"
  see [3], this is NOT a direct dependency (it's only required to get
  WIFI working on the Khadas VIM Pro) and it's already merged for v4.11
  (commit a62a77881b1b6708ffeddd9bf0529494f7b199e3)

  
[0] http://khadas.com/vim/
[1] http://lists.infradead.org/pipermail/linux-amlogic/2017-February/002474.html
[2] http://lists.infradead.org/pipermail/linux-amlogic/2017-March/002658.html
[3] https://www.spinics.net/lists/linux-mmc/msg41627.html

Martin Blumenstingl (3):
  devicetree: add vendor prefix for Khadas
  dt-bindings: amlogic: add the Khadas VIM
  ARM64: dts: meson-gxl: add support for the Khadas VIM board

 Documentation/devicetree/bindings/arm/amlogic.txt  |   2 +
 .../devicetree/bindings/vendor-prefixes.txt        |   1 +
 arch/arm64/boot/dts/amlogic/Makefile               |   1 +
 .../dts/amlogic/meson-gxl-s905x-khadas-vim.dts     | 114 +++++++++++++++++++++
 4 files changed, 118 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts

-- 
2.12.0