From: martin.blumenstingl@googlemail.com (Martin Blumenstingl)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH] watchdog: meson-wdt: add support for the watchdog on Meson8 and Meson8m2
Date: Sun, 11 Jun 2017 11:52:19 +0200 [thread overview]
Message-ID: <20170611095219.22095-1-martin.blumenstingl@googlemail.com> (raw)
The watchdog IP block on Meson8 and Meson8m2 is already supported by the
existing meson-wdt driver. Meson8 uses the same register bits as Meson6,
while the newer Meson8m2 SoC uses the same register bits as Meson8b.
Currently watchdog support on Meson8 SoC already works because
meson8.dtsi simply uses the "amlogic,meson6-wdt" compatible. Adding a
separate compatible for Meson8 makes this more explicit though.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
Documentation/devicetree/bindings/watchdog/meson-wdt.txt | 6 +++++-
drivers/watchdog/meson_wdt.c | 2 ++
2 files changed, 7 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/watchdog/meson-wdt.txt b/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
index ae70185d96e6..f2fbe1a39d31 100644
--- a/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
@@ -2,7 +2,11 @@ Meson SoCs Watchdog timer
Required properties:
-- compatible : should be "amlogic,meson6-wdt" or "amlogic,meson8b-wdt"
+- compatible : depending on the SoC this should be one of:
+ "amlogic,meson6-wdt"
+ "amlogic,meson8-wdt"
+ "amlogic,meson8b-wdt"
+ "amlogic,meson8m2-wdt"
- reg : Specifies base physical address and size of the registers.
Example:
diff --git a/drivers/watchdog/meson_wdt.c b/drivers/watchdog/meson_wdt.c
index 491b9bf13d84..304274c67735 100644
--- a/drivers/watchdog/meson_wdt.c
+++ b/drivers/watchdog/meson_wdt.c
@@ -155,7 +155,9 @@ static const struct watchdog_ops meson_wdt_ops = {
static const struct of_device_id meson_wdt_dt_ids[] = {
{ .compatible = "amlogic,meson6-wdt", .data = &meson6_wdt_data },
+ { .compatible = "amlogic,meson8-wdt", .data = &meson6_wdt_data },
{ .compatible = "amlogic,meson8b-wdt", .data = &meson8b_wdt_data },
+ { .compatible = "amlogic,meson8m2-wdt", .data = &meson8b_wdt_data },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, meson_wdt_dt_ids);
--
2.13.1
next reply other threads:[~2017-06-11 9:52 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-11 9:52 Martin Blumenstingl [this message]
2017-06-12 7:38 ` Neil Armstrong
2017-06-15 17:25 ` Guenter Roeck
2017-06-15 21:13 ` Martin Blumenstingl
2017-06-15 21:22 ` Guenter Roeck
2017-06-18 14:04 ` Rob Herring
2017-06-19 18:50 ` Martin Blumenstingl
2017-06-22 3:22 ` Rob Herring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170611095219.22095-1-martin.blumenstingl@googlemail.com \
--to=martin.blumenstingl@googlemail.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®