From mboxrd@z Thu Jan 1 00:00:00 1970 From: martin.blumenstingl@googlemail.com (Martin Blumenstingl) Date: Thu, 15 Jun 2017 23:33:45 +0200 Subject: [PATCH v2 03/10] ARM: dts: meson8: add the PWM_E and PWM_F pins In-Reply-To: <20170615213352.25134-1-martin.blumenstingl@googlemail.com> References: <20170611101644.28581-1-martin.blumenstingl@googlemail.com> <20170615213352.25134-1-martin.blumenstingl@googlemail.com> Message-ID: <20170615213352.25134-4-martin.blumenstingl@googlemail.com> To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org This adds the definition of the PWM_E (CBUS) and PWM_F (AOBUS) to meson8.dtsi, allowing devices to use them. PWM_E can be used on some devices to generate the 32.768kHz clock for the SDIO wifi module, while PWM_F can be used to control the power LED. Signed-off-by: Martin Blumenstingl Reviewed-by: Neil Armstrong --- arch/arm/boot/dts/meson8.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index c5d73b999773..5ff7903964c6 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -123,6 +123,13 @@ function = "remote"; }; }; + + pwm_f_ao_pins: pwm-f-ao { + mux { + groups = "pwm_f_ao"; + function = "pwm_f_ao"; + }; + }; }; }; @@ -168,6 +175,13 @@ function = "ethernet"; }; }; + + pwm_e_pins: pwm-e { + mux { + groups = "pwm_e"; + function = "pwm_e"; + }; + }; }; }; -- 2.13.1