From mboxrd@z Thu Jan 1 00:00:00 1970 From: martin.blumenstingl@googlemail.com (Martin Blumenstingl) Date: Wed, 12 Jul 2017 00:20:15 +0200 Subject: [PATCH 2/2] ARM: dts: meson8: add the PWM controller nodes In-Reply-To: <20170711222015.10401-1-martin.blumenstingl@googlemail.com> References: <20170711222015.10401-1-martin.blumenstingl@googlemail.com> Message-ID: <20170711222015.10401-3-martin.blumenstingl@googlemail.com> To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org pwm_ab and pwm_cd are already inherited from meson.dtsi, we only need to define the correct "compatible" string so the pwm-meson driver can choose the parent clocks correctly. pwm_ef is added to meson8.dtsi directly (similar to how it's done in meson8b.dtsi) as this controller only exists on Meson8 and Meson8b. Signed-off-by: Martin Blumenstingl --- arch/arm/boot/dts/meson8.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index cada35828931..6fe6a159e960 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -172,6 +172,13 @@ reg = <0x8000 0x4>, <0x4000 0x460>; }; + pwm_ef: pwm at 86c0 { + compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm"; + reg = <0x86c0 0x10>; + #pwm-cells = <3>; + status = "disabled"; + }; + pinctrl_cbus: pinctrl at 9880 { compatible = "amlogic,meson8-cbus-pinctrl"; reg = <0x9880 0x10>; @@ -270,6 +277,14 @@ arm,filter-ranges = <0x100000 0xc0000000>; }; +&pwm_ab { + compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm"; +}; + +&pwm_cd { + compatible = "amlogic,meson8-pwm", "amlogic,meson8b-pwm"; +}; + &saradc { compatible = "amlogic,meson8-saradc", "amlogic,meson-saradc"; clocks = <&clkc CLKID_XTAL>, -- 2.13.2