From mboxrd@z Thu Jan 1 00:00:00 1970 From: jbrunet@baylibre.com (Jerome Brunet) Date: Thu, 31 Aug 2017 15:52:21 +0200 Subject: [PATCH v3 4/9] ARM64: dts: meson-gxbb: nanopi-k2: add card regulator settle times In-Reply-To: <20170831135226.19784-1-jbrunet@baylibre.com> References: <20170831135226.19784-1-jbrunet@baylibre.com> Message-ID: <20170831135226.19784-5-jbrunet@baylibre.com> To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org Changing the card voltage on the nanopi-k2 is not instantaneous, especially when switching from 3.3v to 1.8v. It take at least 3ms for the regulator to go from 3.3v to 1.8v. Add margin to that to make sure we don't upset the sdcard during the voltage switch Fixes: 9bc7ffb08daf ("arm64: dts: amlogic: Add NanoPi K2") Signed-off-by: Jerome Brunet --- arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts index 60d5f2da6916..acb6797756e5 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts @@ -107,6 +107,9 @@ states = <3300000 0>, <1800000 1>; + + regulator-settling-time-up-us = <100>; + regulator-settling-time-down-us = <5000>; }; wifi_32k: wifi-32k { -- 2.9.5