From mboxrd@z Thu Jan 1 00:00:00 1970 From: jbrunet@baylibre.com (Jerome Brunet) Date: Thu, 31 Aug 2017 15:52:22 +0200 Subject: [PATCH v3 5/9] ARM64: dts: meson-gxl: libretech-cc: add card regulator settle times In-Reply-To: <20170831135226.19784-1-jbrunet@baylibre.com> References: <20170831135226.19784-1-jbrunet@baylibre.com> Message-ID: <20170831135226.19784-6-jbrunet@baylibre.com> To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org Changing the card voltage on the cc is not instantaneous, especially when switching from 3.3v to 1.8v. It take at least 30ms for the regulator to go from 3.3v to 1.8v. Add margin to that to make sure we don't upset the sdcard during the voltage switch Fixes: 61ff2af9b278 ("ARM64: dts: fixup libretech cc definition") Signed-off-by: Jerome Brunet --- arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts index a014c052241e..7d252168c2fa 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts @@ -91,6 +91,9 @@ states = <3300000 0>, <1800000 1>; + + regulator-settling-time-up-us = <200>; + regulator-settling-time-down-us = <50000>; }; vddio_boot: regulator-vddio_boot { -- 2.9.5