From mboxrd@z Thu Jan 1 00:00:00 1970 From: jbrunet@baylibre.com (Jerome Brunet) Date: Thu, 21 Sep 2017 19:14:47 +0200 Subject: [PATCH 4/7] ARM64: dts: meson-gxbb: adjust nanopi-k2 gpio-line-names In-Reply-To: <20170921171450.27407-1-jbrunet@baylibre.com> References: <20170921171450.27407-1-jbrunet@baylibre.com> Message-ID: <20170921171450.27407-5-jbrunet@baylibre.com> To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org GPIOX22 is now declared properly and TEST_N has been moved so the gpio-line-names of the nanopi-k2 must be adjusted accordingly Signed-off-by: Jerome Brunet --- arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts index 9697a7a79464..3c445030ed52 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts @@ -180,7 +180,9 @@ "VCCK En", "CON1 Header Pin31", "I2S Header Pin6", "IR In", "I2S Header Pin7", "I2S Header Pin3", "I2S Header Pin4", - "I2S Header Pin5", "HDMI CEC", "SYS LED"; + "I2S Header Pin5", "HDMI CEC", "SYS LED", + /* GPIO_TEST_N */ + ""; }; &pinctrl_periphs { @@ -226,11 +228,9 @@ "Bluetooth UART TX", "Bluetooth UART RX", "Bluetooth UART CTS", "Bluetooth UART RTS", "", "", "", "WIFI 32K", "Bluetooth Enable", - "Bluetooth WAKE HOST", + "Bluetooth WAKE HOST", "", /* Bank GPIOCLK */ - "", "CON1 Header Pin35", "", "", - /* GPIO_TEST_N */ - ""; + "", "CON1 Header Pin35", "", ""; }; &pwm_ef { -- 2.13.5