From: jbrunet@baylibre.com (Jerome Brunet)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH 5/5] ARM64: dts: meson-gx: add external PHY interrupt on some platforms
Date: Thu, 19 Oct 2017 14:01:43 +0200 [thread overview]
Message-ID: <20171019120143.20581-6-jbrunet@baylibre.com> (raw)
In-Reply-To: <20171019120143.20581-1-jbrunet@baylibre.com>
Add the external PHY interrupt on the nanopi-k2, odroid-c2, p200, p230
and q200
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 2 ++
arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 2 ++
arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts | 2 ++
arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts | 2 ++
arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts | 2 ++
5 files changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
index 2e853c082a65..4a4251001bfd 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts
@@ -168,6 +168,8 @@
eth_phy0: ethernet-phy at 0 {
/* Realtek RTL8211F (0x001cc916) */
reg = <0>;
+ interrupt-parent = <&gpio_intc>;
+ interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
};
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 1deaa53c9fb5..fac5c3eeb07d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -157,6 +157,8 @@
eth_phy0: ethernet-phy at 0 {
reg = <0>;
+ interrupt-parent = <&gpio_intc>;
+ interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
eee-broken-1000t;
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
index 2054a474e0a9..9bf16bb7c491 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts
@@ -117,6 +117,8 @@
eth_phy0: ethernet-phy at 3 {
/* Micrel KSZ9031 (0x00221620) */
reg = <3>;
+ interrupt-parent = <&gpio_intc>;
+ interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
};
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
index 6827f235d7cf..4f3f03fc31b0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts
@@ -128,6 +128,8 @@
compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
reg = <0>;
max-speed = <1000>;
+ interrupt-parent = <&gpio_intc>;
+ interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
};
};
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
index b65776b01911..66c6da7e112c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts
@@ -110,6 +110,8 @@
compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
reg = <0>;
max-speed = <1000>;
+ interrupt-parent = <&gpio_intc>;
+ interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
};
};
--
2.13.6
next prev parent reply other threads:[~2017-10-19 12:01 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-10-19 12:01 [PATCH 0/5] ARM: meson: enable gpio interrupt controller Jerome Brunet
2017-10-19 12:01 ` [PATCH 1/5] ARM: meson: enable MESON_IRQ_GPIO in Kconfig for meson8b Jerome Brunet
2017-10-19 12:01 ` [PATCH 2/5] ARM64: meson: enable MESON_IRQ_GPIO in Kconfig Jerome Brunet
2017-10-19 12:01 ` [PATCH 3/5] ARM: dts: meson8b: enable gpio interrupt controller Jerome Brunet
2017-10-19 12:01 ` [PATCH 4/5] ARM64: dts: meson-gx: add " Jerome Brunet
2017-10-19 12:01 ` Jerome Brunet [this message]
2017-10-20 8:12 ` [PATCH 0/5] ARM: meson: enable " Neil Armstrong
2017-10-30 8:28 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171019120143.20581-6-jbrunet@baylibre.com \
--to=jbrunet@baylibre.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®