From mboxrd@z Thu Jan 1 00:00:00 1970 From: martin.blumenstingl@googlemail.com (Martin Blumenstingl) Date: Tue, 31 Oct 2017 23:23:16 +0100 Subject: [PATCH 2/2] ARM: dts: meson8: add more L2 cache settings In-Reply-To: <20171031222316.24548-1-martin.blumenstingl@googlemail.com> References: <20171031222316.24548-1-martin.blumenstingl@googlemail.com> Message-ID: <20171031222316.24548-3-martin.blumenstingl@googlemail.com> To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org Amlogic's vendor kernel prints these PL310 L2 cache controller settings during boot: 8 ways, 4096 sets, CACHE_ID 0x4100a0c9, Cache size: 1048576 B AUX_CTRL 0x7ec80001, PERFETCH_CTRL 0x71000007, POWER_CTRL 0x00000000 TAG_LATENCY 0x00000111, DATA_LATENCY 0x00000222 Add the "prefetch-data", "prefetch-instr" and "arm,shared-override" properties to get the same L2 cache controller configuration as the vendor kernel. Two differences still remain: - L310_AUX_CTRL_NS_INT_CTRL is currently not supported by the cache-l2x0 driver - bit 23 is set by the vendor kernel, but this is defined in cache-l2x0.h Signed-off-by: Martin Blumenstingl --- arch/arm/boot/dts/meson8.dtsi | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index bedcbebc2433..264f2b80e2af 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -313,6 +313,9 @@ arm,data-latency = <3 3 3>; arm,tag-latency = <2 2 2>; arm,filter-ranges = <0x100000 0xc0000000>; + prefetch-data = <1>; + prefetch-instr = <1>; + arm,shared-override; }; &pwm_ab { -- 2.15.0