From: yixun.lan@amlogic.com (Yixun Lan)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH 1/3] dt-bindings: reset: Add bindings for the Meson-AXG SoC Reset Controller
Date: Fri, 10 Nov 2017 16:46:49 +0800 [thread overview]
Message-ID: <20171110084650.31325-1-yixun.lan@amlogic.com> (raw)
Add DT bindings for the Meson-AXG SoC Reset Controller include file,
and also slightly update documentation.
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
.../bindings/reset/amlogic,meson-reset.txt | 3 +-
.../dt-bindings/reset/amlogic,meson-axg-reset.h | 124 +++++++++++++++++++++
2 files changed, 126 insertions(+), 1 deletion(-)
create mode 100644 include/dt-bindings/reset/amlogic,meson-axg-reset.h
diff --git a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.txt b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.txt
index e746b631793a..28ef6c295c76 100644
--- a/Documentation/devicetree/bindings/reset/amlogic,meson-reset.txt
+++ b/Documentation/devicetree/bindings/reset/amlogic,meson-reset.txt
@@ -5,7 +5,8 @@ Please also refer to reset.txt in this directory for common reset
controller binding usage.
Required properties:
-- compatible: Should be "amlogic,meson8b-reset" or "amlogic,meson-gxbb-reset"
+- compatible: Should be "amlogic,meson8b-reset", "amlogic,meson-gxbb-reset" or
+ "amlogic,meson-axg-reset".
- reg: should contain the register address base
- #reset-cells: 1, see below
diff --git a/include/dt-bindings/reset/amlogic,meson-axg-reset.h b/include/dt-bindings/reset/amlogic,meson-axg-reset.h
new file mode 100644
index 000000000000..ad6f55dabd6d
--- /dev/null
+++ b/include/dt-bindings/reset/amlogic,meson-axg-reset.h
@@ -0,0 +1,124 @@
+/*
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2017 Amlogic, inc.
+ * Author: Yixun Lan <yixun.lan@amlogic.com>
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR BSD)
+ */
+
+#ifndef _DT_BINDINGS_AMLOGIC_MESON_AXG_RESET_H
+#define _DT_BINDINGS_AMLOGIC_MESON_AXG_RESET_H
+
+/* RESET0 */
+#define RESET_HIU 0
+#define RESET_PCIE_A 1
+#define RESET_PCIE_B 2
+#define RESET_DDR_TOP 3
+/* 4 */
+#define RESET_VIU 5
+#define RESET_PCIE_PHY 6
+#define RESET_PCIE_APB 7
+/* 8 */
+/* 9 */
+#define RESET_VENC 10
+#define RESET_ASSIST 11
+/* 12 */
+#define RESET_VCBUS 13
+/* 14 */
+/* 15 */
+#define RESET_GIC 16
+#define RESET_CAPB3_DECODE 17
+/* 18-21 */
+#define RESET_SYS_CPU_CAPB3 22
+#define RESET_CBUS_CAPB3 23
+#define RESET_AHB_CNTL 24
+#define RESET_AHB_DATA 25
+#define RESET_VCBUS_CLK81 26
+#define RESET_MMC 27
+/* 28-31 */
+/* RESET1 */
+/* 32 */
+/* 33 */
+#define RESET_USB_OTG 34
+#define RESET_DDR 35
+#define RESET_AO_RESET 36
+/* 37 */
+#define RESET_AHB_SRAM 38
+/* 39 */
+/* 40 */
+#define RESET_DMA 41
+#define RESET_ISA 42
+#define RESET_ETHERNET 43
+/* 44 */
+#define RESET_SD_EMMC_B 45
+#define RESET_SD_EMMC_C 46
+#define RESET_ROM_BOOT 47
+#define RESET_SYS_CPU_0 48
+#define RESET_SYS_CPU_1 49
+#define RESET_SYS_CPU_2 50
+#define RESET_SYS_CPU_3 51
+#define RESET_SYS_CPU_CORE_0 52
+#define RESET_SYS_CPU_CORE_1 53
+#define RESET_SYS_CPU_CORE_2 54
+#define RESET_SYS_CPU_CORE_3 55
+#define RESET_SYS_PLL_DIV 56
+#define RESET_SYS_CPU_AXI 57
+#define RESET_SYS_CPU_L2 58
+#define RESET_SYS_CPU_P 59
+#define RESET_SYS_CPU_MBIST 60
+/* 61-63 */
+/* RESET2 */
+/* 64 */
+/* 65 */
+#define RESET_AUDIO 66
+/* 67 */
+#define RESET_MIPI_HOST 68
+#define RESET_AUDIO_LOCKER 69
+#define RESET_GE2D 70
+/* 71-76 */
+#define RESET_AO_CPU_RESET 77
+/* 78-95 */
+/* RESET3 */
+#define RESET_RING_OSCILLATOR 96
+/* 97-127 */
+/* RESET4 */
+/* 128 */
+/* 129 */
+#define RESET_MIPI_PHY 130
+/* 131-140 */
+#define RESET_VENCL 141
+#define RESET_I2C_MASTER_2 142
+#define RESET_I2C_MASTER_1 143
+/* 144-159 */
+/* RESET5 */
+/* 160-191 */
+/* RESET6 */
+#define RESET_PERIPHS_GENERAL 192
+#define RESET_PERIPHS_SPICC 193
+/* 194 */
+/* 195 */
+#define RESET_PERIPHS_I2C_MASTER_0 196
+/* 197-200 */
+#define RESET_PERIPHS_UART_0 201
+#define RESET_PERIPHS_UART_1 202
+/* 203-204 */
+#define RESET_PERIPHS_SPI_0 205
+#define RESET_PERIPHS_I2C_MASTER_3 206
+/* 207-223 */
+/* RESET7 */
+#define RESET_USB_DDR_0 224
+#define RESET_USB_DDR_1 225
+#define RESET_USB_DDR_2 226
+#define RESET_USB_DDR_3 227
+/* 228 */
+#define RESET_DEVICE_MMC_ARB 229
+/* 230 */
+#define RESET_VID_LOCK 231
+#define RESET_A9_DMC_PIPEL 232
+#define RESET_DMC_VPU_PIPEL 233
+/* 234-255 */
+
+#endif
--
2.14.1
next reply other threads:[~2017-11-10 8:46 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-10 8:46 Yixun Lan [this message]
2017-11-10 8:46 ` [PATCH 2/3] reset: meson-axg: add compatible string for Meson-AXG SoC Yixun Lan
2017-11-17 13:08 ` Neil Armstrong
2017-12-13 14:07 ` Yixun Lan
2017-12-13 16:01 ` Philipp Zabel
2017-12-14 3:14 ` Yixun Lan
2017-11-17 13:08 ` [PATCH 1/3] dt-bindings: reset: Add bindings for the Meson-AXG SoC Reset Controller Neil Armstrong
2018-11-12 19:20 ` Thomas Gleixner
2019-01-16 10:14 ` Thomas Gleixner
2019-01-17 19:29 ` Kevin Hilman
2019-01-17 19:31 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171110084650.31325-1-yixun.lan@amlogic.com \
--to=yixun.lan@amlogic.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®