From mboxrd@z Thu Jan 1 00:00:00 1970 From: martin.blumenstingl@googlemail.com (Martin Blumenstingl) Date: Sat, 2 Dec 2017 22:40:37 +0100 Subject: [PATCH 2/2] ARM64: dts: meson-gxm: add the PHY interrupt line on Khadas VIM2 In-Reply-To: <20171202214037.17017-1-martin.blumenstingl@googlemail.com> References: <20171202214037.17017-1-martin.blumenstingl@googlemail.com> Message-ID: <20171202214037.17017-3-martin.blumenstingl@googlemail.com> To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org The INTB/PMEB pin of the RTL8211F PHY on the Khadas VIM2 is routed to GPIOZ_15. Add the corresponding interrupt using the GPIO interrupt controller so the PHY framework doesn't have to poll the PHY for it's status. Signed-off-by: Martin Blumenstingl --- arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts index 34a41b26a4ed..5c2bc2989519 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts @@ -232,6 +232,9 @@ external_phy: ethernet-phy at 0 { /* Realtek RTL8211F (0x001cc916) */ reg = <0>; + interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_15 */ + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; }; }; -- 2.15.1