From mboxrd@z Thu Jan 1 00:00:00 1970 From: martin.blumenstingl@googlemail.com (Martin Blumenstingl) Date: Sat, 2 Dec 2017 22:51:25 +0100 Subject: [PATCH net-next 2/5] net: phy: realtek: rename RTL821x_INER_INIT to RTL8211B_INER_INIT In-Reply-To: <20171202215128.20202-1-martin.blumenstingl@googlemail.com> References: <20171202215128.20202-1-martin.blumenstingl@googlemail.com> Message-ID: <20171202215128.20202-3-martin.blumenstingl@googlemail.com> To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org This macro is only used by the RTL8211B code. RTL8211E and RTL8211F both use other bits to initialize the RTL821x_INER register. No functional changes. Signed-off-by: Martin Blumenstingl --- drivers/net/phy/realtek.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c index 9708aa9c58dd..59f0688e4d28 100644 --- a/drivers/net/phy/realtek.c +++ b/drivers/net/phy/realtek.c @@ -21,7 +21,7 @@ #define RTL821x_PHYSR_DUPLEX BIT(13) #define RTL821x_PHYSR_SPEED GENMASK(15, 14) #define RTL821x_INER 0x12 -#define RTL821x_INER_INIT 0x6400 +#define RTL8211B_INER_INIT 0x6400 #define RTL821x_INSR 0x13 #define RTL821x_PAGE_SELECT 0x1f #define RTL8211E_INER_LINK_STATUS BIT(10) @@ -92,7 +92,7 @@ static int rtl8211b_config_intr(struct phy_device *phydev) if (phydev->interrupts == PHY_INTERRUPT_ENABLED) err = phy_write(phydev, RTL821x_INER, - RTL821x_INER_INIT); + RTL8211B_INER_INIT); else err = phy_write(phydev, RTL821x_INER, 0); -- 2.15.1