From: jbrunet@baylibre.com (Jerome Brunet)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH 7/9] clk: meson: fix pll with fractional part calculation
Date: Thu, 18 Jan 2018 19:45:30 +0100 [thread overview]
Message-ID: <20180118184532.6856-8-jbrunet@baylibre.com> (raw)
In-Reply-To: <20180118184532.6856-1-jbrunet@baylibre.com>
The rate of the parent should not be multiplied by 2 when there is a
fractional part to the pll. This is making the rate calculation of
gxl_hdmi_pll wrong (and others as well). This multiplication is specific
to the hdmi_pll of gxbb and is most likely due to a multiplier sitting
in front of this particular pll.
Add fixed factor clock in front on the gxbb pll and remove this constant
from the calculation
Fixes: 4a47295144dd ("clk: meson: fractional pll support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
drivers/clk/meson/clk-pll.c | 1 -
drivers/clk/meson/gxbb.c | 14 +++++++++++++-
drivers/clk/meson/gxbb.h | 3 ++-
3 files changed, 15 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/meson/clk-pll.c b/drivers/clk/meson/clk-pll.c
index 3f560b2cd83b..8845f65aeb07 100644
--- a/drivers/clk/meson/clk-pll.c
+++ b/drivers/clk/meson/clk-pll.c
@@ -87,7 +87,6 @@ static unsigned long meson_clk_pll_recalc_rate(struct clk_hw *hw,
frac = PARM_GET(p->width, p->shift, reg);
rate += (u64)parent_rate * frac >> p->width;
- rate *= 2;
}
return (rate / n) >> od >> od2 >> od3;
diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
index 08b3e1cdba5b..9a92e64b428c 100644
--- a/drivers/clk/meson/gxbb.c
+++ b/drivers/clk/meson/gxbb.c
@@ -212,6 +212,17 @@ static struct meson_clk_pll gxbb_fixed_pll = {
},
};
+static struct clk_fixed_factor gxbb_hdmi_pll_pre_mult = {
+ .mult = 2,
+ .div = 1,
+ .hw.init = &(struct clk_init_data){
+ .name = "hdmi_pll_pre_mult",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "xtal" },
+ .num_parents = 1,
+ },
+};
+
static struct meson_clk_pll gxbb_hdmi_pll = {
.m = {
.reg_off = HHI_HDMI_PLL_CNTL,
@@ -247,7 +258,7 @@ static struct meson_clk_pll gxbb_hdmi_pll = {
.hw.init = &(struct clk_init_data){
.name = "hdmi_pll",
.ops = &meson_clk_pll_ro_ops,
- .parent_names = (const char *[]){ "xtal" },
+ .parent_names = (const char *[]){ "hdmi_pll_pre_mult" },
.num_parents = 1,
.flags = CLK_GET_RATE_NOCACHE,
},
@@ -1558,6 +1569,7 @@ static struct clk_hw_onecell_data gxbb_hw_onecell_data = {
[CLKID_VAPB_1] = &gxbb_vapb_1.hw,
[CLKID_VAPB_SEL] = &gxbb_vapb_sel.hw,
[CLKID_VAPB] = &gxbb_vapb.hw,
+ [CLKID_HDMI_PLL_PRE_MULT] = &gxbb_hdmi_pll_pre_mult.hw,
[NR_CLKS] = NULL,
},
.num = NR_CLKS,
diff --git a/drivers/clk/meson/gxbb.h b/drivers/clk/meson/gxbb.h
index aee6fbba2004..42573b28a137 100644
--- a/drivers/clk/meson/gxbb.h
+++ b/drivers/clk/meson/gxbb.h
@@ -194,8 +194,9 @@
#define CLKID_VPU_1_DIV 130
#define CLKID_VAPB_0_DIV 134
#define CLKID_VAPB_1_DIV 137
+#define CLKID_HDMI_PLL_PRE_MULT 141
-#define NR_CLKS 141
+#define NR_CLKS 142
/* include the CLKIDs that have been made part of the DT binding */
#include <dt-bindings/clock/gxbb-clkc.h>
--
2.14.3
next prev parent reply other threads:[~2018-01-18 18:45 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-18 18:45 [PATCH 0/9] clk: meson: pll fixes Jerome Brunet
2018-01-18 18:45 ` [PATCH 1/9] clk: meson: check pll rate param table before using it Jerome Brunet
2018-01-18 18:45 ` [PATCH 2/9] clk: meson: remove useless pll rate param tables Jerome Brunet
2018-01-18 18:45 ` [PATCH 3/9] clk: meson: remove unnecessary rounding in the pll clock Jerome Brunet
2018-01-19 2:06 ` Yixun Lan
2018-01-18 18:45 ` [PATCH 4/9] clk: meson: use frac parameter width instead of a constant Jerome Brunet
2018-01-18 18:45 ` [PATCH 5/9] clk: meson: add od3 to the pll driver Jerome Brunet
2018-01-18 18:45 ` [PATCH 6/9] clk: meson: add gxl hdmi pll Jerome Brunet
2018-01-18 18:45 ` Jerome Brunet [this message]
2018-01-18 18:45 ` [PATCH 8/9] clk: meson: gxbb: add the fractional part of the fixed_pll Jerome Brunet
2018-01-18 18:45 ` [PATCH 9/9] clk: meson: axg: " Jerome Brunet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180118184532.6856-8-jbrunet@baylibre.com \
--to=jbrunet@baylibre.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®