From: martin.blumenstingl@googlemail.com (Martin Blumenstingl)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH usb-next v2 0/3] DWC3 support for Amlogic Meson AXG and GXL SoCs
Date: Sun, 11 Feb 2018 22:15:14 +0100 [thread overview]
Message-ID: <20180211211517.5846-1-martin.blumenstingl@googlemail.com> (raw)
Amlogic Meson AXG and GXL SoCs can use the dwc3-of-simple with little
modifications. These SoCs use:
- a gate clock for the USB components (DWC3, USB PHYs)
- a reset line which is shared across all USB components (DWC3, USB2 and
USB3 PHYs, OTG detection logic inside the USB3 PHY registers)
- a reset pulse to trigger the reset
- depending on the SoC two or more PHYs (AXG: 1x USB2 and 1x USB3 PHY,
GXL: 2x USB2 and 1x USB3 PHY)
This extends the dwc3-of-simple so it supports (depending on the
platform) shared and level resets. Additionally it adds new bindings
for the Amlogic Meson AXG and GXL SoCs, along with the documentation
(dt-bindings).
NOTE: for full support on Amlogic Meson GXL SoCs my other series called
"initialize (multiple) PHYs for a HCD" (see [0] for v8 of that series)
is required. However, there is no direct dependency on that series.
Especially since Meson AXG doesn't need it (since it only has one USB2
and one USB3 PHY, which is already supported by the current dwc3 driver,
unlike the 2x USB2 and 1x USB3 PHYs on Meson GXL).
So I believe that this series can still be merged, even if the other
patchset is not ready yet.
changes since v1 at [1]:
- use of_device_is_compatible() instead of struct dwc3_of_simple_params
as requested by Felipe Balbi (affects PATCH #2 and #3)
- added Rob's Acked-by to the dt-bindings patch
- added Yixun Lan's Tested-by to the whole series as he tested this
successfully (along with other patches) on the Amlogic Meson AXG SoC
[0] http://lists.infradead.org/pipermail/linux-amlogic/2018-January/006274.html
[1] http://lists.infradead.org/pipermail/linux-amlogic/2018-January/006286.html
Martin Blumenstingl (3):
dt-bindings: usb: add support for dwc3 controller on Amlogic Meson GX
usb: dwc3: of-simple: add support for shared and pulsed reset lines
usb: dwc3: of-simple: add support for the Amlogic Meson GXL and AXG
SoCs
.../devicetree/bindings/usb/amlogic,dwc3.txt | 42 ++++++++++++++++++++++
drivers/usb/dwc3/dwc3-of-simple.c | 31 ++++++++++++----
2 files changed, 67 insertions(+), 6 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/amlogic,dwc3.txt
--
2.16.1
next reply other threads:[~2018-02-11 21:15 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-11 21:15 Martin Blumenstingl [this message]
2018-02-11 21:15 ` [PATCH usb-next v2 1/3] dt-bindings: usb: add support for dwc3 controller on Amlogic Meson GX Martin Blumenstingl
2018-02-11 21:15 ` [PATCH usb-next v2 2/3] usb: dwc3: of-simple: add support for shared and pulsed reset lines Martin Blumenstingl
2018-02-11 21:15 ` [PATCH usb-next v2 3/3] usb: dwc3: of-simple: add support for the Amlogic Meson GXL and AXG SoCs Martin Blumenstingl
2018-02-20 22:39 ` [PATCH usb-next v2 0/3] DWC3 support for Amlogic Meson AXG and GXL SoCs Martin Blumenstingl
2018-03-03 21:50 ` Martin Blumenstingl
2018-03-08 8:49 ` Felipe Balbi
2018-03-07 13:13 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180211211517.5846-1-martin.blumenstingl@googlemail.com \
--to=martin.blumenstingl@googlemail.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®