From: martin.blumenstingl@googlemail.com (Martin Blumenstingl)
To: linus-amlogic@lists.infradead.org
Subject: [net-next PATCH v1 3/3] net: stmmac: dwmac-meson8b: make the clock configurations private
Date: Sat, 17 Feb 2018 15:08:20 +0100 [thread overview]
Message-ID: <20180217140820.30257-4-martin.blumenstingl@googlemail.com> (raw)
In-Reply-To: <20180217140820.30257-1-martin.blumenstingl@googlemail.com>
The common clock framework needs access to the "clock configuration"
structs during runtime.
However, only the common clock framework should access these. Ensure
this by moving the configuration structs out of struct meson8b_dwmac,
so only meson8b_init_rgmii_tx_clk() and the common clock framework know
about these configurations.
Suggested-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
.../net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 45 ++++++++++++----------
1 file changed, 24 insertions(+), 21 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
index 0dfce35c5583..2d5d4aea3bcb 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
@@ -49,19 +49,17 @@
struct meson8b_dwmac {
struct device *dev;
-
void __iomem *regs;
-
phy_interface_t phy_mode;
+ struct clk *rgmii_tx_clk;
+ u32 tx_delay_ns;
+};
+struct meson8b_dwmac_clk_configs {
struct clk_mux m250_mux;
struct clk_divider m250_div;
struct clk_fixed_factor fixed_div2;
struct clk_gate rgmii_tx_en;
-
- struct clk *rgmii_tx_clk;
-
- u32 tx_delay_ns;
};
static void meson8b_dwmac_mask_bits(struct meson8b_dwmac *dwmac, u32 reg,
@@ -106,6 +104,11 @@ static int meson8b_init_rgmii_tx_clk(struct meson8b_dwmac *dwmac)
struct clk *clk;
struct device *dev = dwmac->dev;
const char *parent_name, *mux_parent_names[MUX_CLK_NUM_PARENTS];
+ struct meson8b_dwmac_clk_configs *clk_configs;
+
+ clk_configs = devm_kzalloc(dev, sizeof(*clk_configs), GFP_KERNEL);
+ if (!clk_configs)
+ return -ENOMEM;
/* get the mux parents from DT */
for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) {
@@ -123,43 +126,43 @@ static int meson8b_init_rgmii_tx_clk(struct meson8b_dwmac *dwmac)
mux_parent_names[i] = __clk_get_name(clk);
}
- dwmac->m250_mux.reg = dwmac->regs + PRG_ETH0;
- dwmac->m250_mux.shift = PRG_ETH0_CLK_M250_SEL_SHIFT;
- dwmac->m250_mux.mask = PRG_ETH0_CLK_M250_SEL_MASK;
+ clk_configs->m250_mux.reg = dwmac->regs + PRG_ETH0;
+ clk_configs->m250_mux.shift = PRG_ETH0_CLK_M250_SEL_SHIFT;
+ clk_configs->m250_mux.mask = PRG_ETH0_CLK_M250_SEL_MASK;
clk = meson8b_dwmac_register_clk(dwmac, "m250_sel", mux_parent_names,
MUX_CLK_NUM_PARENTS, &clk_mux_ops,
- &dwmac->m250_mux.hw);
+ &clk_configs->m250_mux.hw);
if (WARN_ON(IS_ERR(clk)))
return PTR_ERR(clk);
parent_name = __clk_get_name(clk);
- dwmac->m250_div.reg = dwmac->regs + PRG_ETH0;
- dwmac->m250_div.shift = PRG_ETH0_CLK_M250_DIV_SHIFT;
- dwmac->m250_div.width = PRG_ETH0_CLK_M250_DIV_WIDTH;
- dwmac->m250_div.flags = CLK_DIVIDER_ONE_BASED |
+ clk_configs->m250_div.reg = dwmac->regs + PRG_ETH0;
+ clk_configs->m250_div.shift = PRG_ETH0_CLK_M250_DIV_SHIFT;
+ clk_configs->m250_div.width = PRG_ETH0_CLK_M250_DIV_WIDTH;
+ clk_configs->m250_div.flags = CLK_DIVIDER_ONE_BASED |
CLK_DIVIDER_ALLOW_ZERO |
CLK_DIVIDER_ROUND_CLOSEST;
clk = meson8b_dwmac_register_clk(dwmac, "m250_div", &parent_name, 1,
&clk_divider_ops,
- &dwmac->m250_div.hw);
+ &clk_configs->m250_div.hw);
if (WARN_ON(IS_ERR(clk)))
return PTR_ERR(clk);
parent_name = __clk_get_name(clk);
- dwmac->fixed_div2.mult = 1;
- dwmac->fixed_div2.div = 2;
+ clk_configs->fixed_div2.mult = 1;
+ clk_configs->fixed_div2.div = 2;
clk = meson8b_dwmac_register_clk(dwmac, "fixed_div2", &parent_name, 1,
&clk_fixed_factor_ops,
- &dwmac->fixed_div2.hw);
+ &clk_configs->fixed_div2.hw);
if (WARN_ON(IS_ERR(clk)))
return PTR_ERR(clk);
parent_name = __clk_get_name(clk);
- dwmac->rgmii_tx_en.reg = dwmac->regs + PRG_ETH0;
- dwmac->rgmii_tx_en.bit_idx = PRG_ETH0_RGMII_TX_CLK_EN;
+ clk_configs->rgmii_tx_en.reg = dwmac->regs + PRG_ETH0;
+ clk_configs->rgmii_tx_en.bit_idx = PRG_ETH0_RGMII_TX_CLK_EN;
clk = meson8b_dwmac_register_clk(dwmac, "rgmii_tx_en", &parent_name, 1,
&clk_gate_ops,
- &dwmac->rgmii_tx_en.hw);
+ &clk_configs->rgmii_tx_en.hw);
if (WARN_ON(IS_ERR(clk)))
return PTR_ERR(clk);
--
2.16.1
next prev parent reply other threads:[~2018-02-17 14:08 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-17 14:08 [net-next PATCH v1 0/3] dwmac-meson8b: small cleanup Martin Blumenstingl
2018-02-17 14:08 ` [net-next PATCH v1 1/3] net: stmmac: dwmac-meson8b: simplify clock registration Martin Blumenstingl
2018-02-17 16:38 ` Jerome Brunet
2018-02-17 14:08 ` [net-next PATCH v1 2/3] net: stmmac: dwmac-meson8b: only keep struct device around Martin Blumenstingl
2018-02-17 14:08 ` Martin Blumenstingl [this message]
2018-02-17 16:41 ` [net-next PATCH v1 3/3] net: stmmac: dwmac-meson8b: make the clock configurations private Jerome Brunet
2018-02-17 17:42 ` Martin Blumenstingl
2018-02-19 16:27 ` [net-next PATCH v1 0/3] dwmac-meson8b: small cleanup David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180217140820.30257-4-martin.blumenstingl@googlemail.com \
--to=martin.blumenstingl@googlemail.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®