From mboxrd@z Thu Jan 1 00:00:00 1970 From: martin.blumenstingl@googlemail.com (Martin Blumenstingl) Date: Mon, 12 Mar 2018 22:42:49 +0100 Subject: [RFC v1 7/7] ARM64: dts: meson-gxm-khadas-vim2: enable the USB controller In-Reply-To: <20180312214249.17846-1-martin.blumenstingl@googlemail.com> References: <20180312214249.17846-1-martin.blumenstingl@googlemail.com> Message-ID: <20180312214249.17846-8-martin.blumenstingl@googlemail.com> To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org The Khadas VIM2 board connects the dwc3 controller to an internal 4-port USB hub which. Two of these ports are accessible directly soldered to the board, while the other two are accessible through the 40-pin "GPIO" header. Signed-off-by: Martin Blumenstingl --- arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts index 447b9e22cf8e..6fda7283c732 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts @@ -412,3 +412,7 @@ status = "okay"; vref-supply = <&vddio_ao18>; }; + +&usb0 { + status = "okay"; +}; -- 2.16.2