From mboxrd@z Thu Jan 1 00:00:00 1970 From: jbrunet@baylibre.com (Jerome Brunet) Date: Thu, 15 Mar 2018 12:55:45 +0100 Subject: [PATCH 4/4] ARM64: dts: meson-gx: fix gxl clock controller compatible In-Reply-To: <20180315115545.1884-1-jbrunet@baylibre.com> References: <20180315115545.1884-1-jbrunet@baylibre.com> Message-ID: <20180315115545.1884-5-jbrunet@baylibre.com> To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org There are a few differences between the gxbb and gxl clock controllers which makes them incompatible. The hdmi, gp0 and fixed pll are different. The rate of these plls reported by gxbb driver on a gxl device would be wrong. Remove the gxbb compatible from the gxl clock controller node so only the correct driver is matched. Fixes: 973fbd55b53c ("ARM64: dts: meson-gxl: Add clock nodes") Signed-off-by: Jerome Brunet --- arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index 6b7dfa2d48e4..86f673017a1f 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -208,7 +208,7 @@ &sysctrl { clkc: clock-controller { - compatible = "amlogic,gxl-clkc", "amlogic,gxbb-clkc"; + compatible = "amlogic,gxl-clkc"; #clock-cells = <1>; }; }; -- 2.14.3