From: sean@mess.org (Sean Young)
To: linus-amlogic@lists.infradead.org
Subject: [1/3] media: rc: drivers should produce alternate pulse and space timing events
Date: Tue, 19 Jun 2018 13:57:55 +0100 [thread overview]
Message-ID: <20180619125755.cd3tyfgsx5yqjohw@gofer.mess.org> (raw)
In-Reply-To: <1529410092.28510.20.camel@baylibre.com>
On Tue, Jun 19, 2018 at 02:08:12PM +0200, Jerome Brunet wrote:
> On Sat, 2018-05-12 at 11:55 +0100, Sean Young wrote:
> > Report an error if this is not the case or any problem with the generated
> > raw events.
>
> Hi,
>
> Since the inclusion of this patch, every 3 to 15 seconds, I get the following
> message:
>
> "rc rc0: two consecutive events of type space"
>
> on the console of amlogic s400 platform (arch/arm64/boot/dts/amlogic/meson-axg-
> s400.dts). I don't know much about ir protocol and surely there is something
> worth investigating in the related driver, but ...
>
> >
> > Signed-off-by: Sean Young <sean@mess.org>
> > ---
> > drivers/media/rc/rc-ir-raw.c | 19 +++++++++++++++----
> > 1 file changed, 15 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/media/rc/rc-ir-raw.c b/drivers/media/rc/rc-ir-raw.c
> > index 2e50104ae138..49c56da9bc67 100644
> > --- a/drivers/media/rc/rc-ir-raw.c
> > +++ b/drivers/media/rc/rc-ir-raw.c
> > @@ -22,16 +22,27 @@ static int ir_raw_event_thread(void *data)
> > {
> > struct ir_raw_event ev;
> > struct ir_raw_handler *handler;
> > - struct ir_raw_event_ctrl *raw = (struct ir_raw_event_ctrl *)data;
> > + struct ir_raw_event_ctrl *raw = data;
> > + struct rc_dev *dev = raw->dev;
> >
> > while (1) {
> > mutex_lock(&ir_raw_handler_lock);
> > while (kfifo_out(&raw->kfifo, &ev, 1)) {
> > + if (is_timing_event(ev)) {
> > + if (ev.duration == 0)
> > + dev_err(&dev->dev, "nonsensical timing event of duration 0");
> > + if (is_timing_event(raw->prev_ev) &&
> > + !is_transition(&ev, &raw->prev_ev))
> > + dev_err(&dev->dev, "two consecutive events of type %s",
> > + TO_STR(ev.pulse));
> > + if (raw->prev_ev.reset && ev.pulse == 0)
> > + dev_err(&dev->dev, "timing event after reset should be pulse");
> > + }
>
> ... considering that we continue the processing as if nothing happened, is it
> really an error ?
>
> Could we consider something less invasive ? like dev_dbg() or dev_warn_once() ?
Maybe it should be dev_warn(). The fact that it is not dev_warn_once() means
that we now know this occurs regularly.
Would you mind testing the following patch please?
Thanks
Sean
>From 6a44fbe4738d230b9cf378777e7e9a93e5fda726 Mon Sep 17 00:00:00 2001
From: Sean Young <sean@mess.org>
Date: Tue, 19 Jun 2018 13:50:36 +0100
Subject: [PATCH] media: rc: meson: rc rc0: two consecutive events of type
space
The meson generates one edge per interrupt. The duration is encoded in 12
bits of 10 microseconds, so it can only encoding a maximum of 40
milliseconds. As a result, it can produce multiple space events.
Signed-off-by: Sean Young <sean@mess.org>
---
drivers/media/rc/meson-ir.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/media/rc/meson-ir.c b/drivers/media/rc/meson-ir.c
index f449b35d25e7..9747426719b2 100644
--- a/drivers/media/rc/meson-ir.c
+++ b/drivers/media/rc/meson-ir.c
@@ -97,7 +97,8 @@ static irqreturn_t meson_ir_irq(int irqno, void *dev_id)
status = readl_relaxed(ir->reg + IR_DEC_STATUS);
rawir.pulse = !!(status & STATUS_IR_DEC_IN);
- ir_raw_event_store_with_timeout(ir->rc, &rawir);
+ if (ir_raw_event_store_with_filter(ir->rc, &rawir))
+ ir_raw_event_handle(ir->rc);
spin_unlock(&ir->lock);
--
2.17.1
next prev parent reply other threads:[~2018-06-19 12:57 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20180512105531.30482-1-sean@mess.org>
2018-06-19 12:08 ` Jerome Brunet
2018-06-19 12:57 ` Sean Young [this message]
2018-06-19 14:09 ` Jerome Brunet
2018-06-26 14:37 ` Sean Young
2018-06-26 14:39 ` Jerome Brunet
2018-06-26 16:33 ` Sean Young
2018-06-26 16:46 ` Jerome Brunet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180619125755.cd3tyfgsx5yqjohw@gofer.mess.org \
--to=sean@mess.org \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®