From mboxrd@z Thu Jan 1 00:00:00 1970 From: martin.blumenstingl@googlemail.com (Martin Blumenstingl) Date: Sat, 23 Jun 2018 21:38:27 +0200 Subject: [PATCH 0/1] move wifi node out of meson-gx-p23x-q20x.dtsi Message-ID: <20180623193828.6047-1-martin.blumenstingl@googlemail.com> To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org while working on support for the S905W SoC I had a look at meson-gx-p23x-q20x.dtsi. this defines that the board uses a Broadcom SDIO wifi chip. I discovered that NEXBOX A1 includes that .dtsi, but it comes with a QCA9377 SDIO wifi chip (thus not Broadcom based). This patch is based on my patch ([0]) from the series "enable the SAR ADC for all boards based on P23x and Q20x" [0] https://patchwork.kernel.org/patch/10483679/ Martin Blumenstingl (1): ARM64: dts: meson-gx-p23x-q20x: move the wifi node to each board's .dts arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 5 ----- arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts | 7 +++++++ arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p231.dts | 7 +++++++ arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts | 7 +++++++ arch/arm64/boot/dts/amlogic/meson-gxm-q201.dts | 7 +++++++ 5 files changed, 28 insertions(+), 5 deletions(-) -- 2.18.0