mirror of https://lore.kernel.org/linux-amlogic/
 help / color / mirror / Atom feed
From: martin.blumenstingl@googlemail.com (Martin Blumenstingl)
To: linus-amlogic@lists.infradead.org
Subject: [RfC v1 0/5] ARM64: amlogic: add support for the S905W and two boards
Date: Sun, 24 Jun 2018 20:28:09 +0200	[thread overview]
Message-ID: <20180624182814.31691-1-martin.blumenstingl@googlemail.com> (raw)

The goal of this series is to to add support for the Amlogic S905W SoC
along with Amlogic's P281 development board and the Tanix TX3 Mini (which
both use the S905W SoC).

I am sending this as request-for-comments because I would like to get
feedback specifically on:
- the naming of the new vendor "Oranth" and their brand "Tanix". more
  information regarding their relation can be found in patch #1
- I do not have access to the P281 development board (nor any
  documentation apart from what is available in Amlogic's GPL kernel
  sources). thus it would be great if someone from Amlogic could confirm
  that my .dts is working
- the S905W SoC is a cost-reduced version of the S905X SoC. I have
  documented the differences that I am aware of in patch #2. none of
  these changes require adjustments to any existing driver/binding
  because these changes are either handled in the SCPI firmware (CPU
  frequency and DDR interface) or there is no Linux support for them
  yet (4k HDMI resolutions and the HW video decoder)


Martin Blumenstingl (5):
  dt-bindings: add vendor prefix for Shenzhen Oranth Technology Co.,
    Ltd.
  dt-bindings: arm: amlogic: Add support for GXL S905W and the P281
    board
  dt-bindings: arm: amlogic: Add support for the Oranth Tanix TX3 Mini
  ARM64: dts: meson-gxl: add support for the S905W SoC and the P281
    board - WiP
  ARM64: dts: meson-gxl: add support for the Oranth Tanix TX3 Mini

 .../devicetree/bindings/arm/amlogic.txt       |  7 ++++++
 .../devicetree/bindings/vendor-prefixes.txt   |  1 +
 arch/arm64/boot/dts/amlogic/Makefile          |  2 ++
 .../boot/dts/amlogic/meson-gxl-s905w-p281.dts | 22 +++++++++++++++++++
 .../dts/amlogic/meson-gxl-s905w-tx3-mini.dts  | 22 +++++++++++++++++++
 .../boot/dts/amlogic/meson-gxl-s905w.dtsi     | 20 +++++++++++++++++
 6 files changed, 74 insertions(+)
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905w-p281.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905w-tx3-mini.dts
 create mode 100644 arch/arm64/boot/dts/amlogic/meson-gxl-s905w.dtsi

-- 
2.18.0

             reply	other threads:[~2018-06-24 18:28 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-24 18:28 Martin Blumenstingl [this message]
2018-06-24 18:28 ` [RfC v1 1/5] dt-bindings: add vendor prefix for Shenzhen Oranth Technology Co., Ltd Martin Blumenstingl
2018-06-25 21:01   ` Rob Herring
2018-06-24 18:28 ` [RfC v1 2/5] dt-bindings: arm: amlogic: Add support for GXL S905W and the P281 board Martin Blumenstingl
2018-06-25 21:03   ` Rob Herring
2018-06-24 18:28 ` [RfC v1 3/5] dt-bindings: arm: amlogic: Add support for the Oranth Tanix TX3 Mini Martin Blumenstingl
2018-06-25 21:03   ` Rob Herring
2018-06-24 18:28 ` [RfC v1 4/5] ARM64: dts: meson-gxl: add support for the S905W SoC and the P281 board - WiP Martin Blumenstingl
2018-06-25 12:51   ` Neil Armstrong
2018-06-25 17:25     ` Martin Blumenstingl
2018-06-29 21:50     ` Kevin Hilman
2018-06-24 18:28 ` [RfC v1 5/5] ARM64: dts: meson-gxl: add support for the Oranth Tanix TX3 Mini Martin Blumenstingl
2018-06-29 21:53   ` Kevin Hilman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180624182814.31691-1-martin.blumenstingl@googlemail.com \
    --to=martin.blumenstingl@googlemail.com \
    --cc=linus-amlogic@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®