From mboxrd@z Thu Jan 1 00:00:00 1970 From: martin.blumenstingl@googlemail.com (Martin Blumenstingl) Date: Sat, 21 Jul 2018 21:05:52 +0200 Subject: [PATCH 1/2] ARM: dts: meson8: fix the clock controller register size In-Reply-To: <20180721190553.13940-1-martin.blumenstingl@googlemail.com> References: <20180721190553.13940-1-martin.blumenstingl@googlemail.com> Message-ID: <20180721190553.13940-2-martin.blumenstingl@googlemail.com> To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org The clock controller registers are not 0x460 wide because the reset controller starts at CBUS 0x4404. This currently overlaps with the clock controller (which is at CBUS 0x4000). There is no public documentation available on the actual size of the clock controller's register area (also called "HHI"). However, in Amlogic's GPL kernel sources the last "HHI" register is HHI_HDMI_PHY_CNTL2 at CBUS + 0x43a8. 0x400 was chosen because that size doesn't seem unlikely. Fixes: 2c323c43a3d619 ("ARM: dts: meson8: add and use the real clock controller") Signed-off-by: Martin Blumenstingl --- arch/arm/boot/dts/meson8.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index d77dcf890cfc..7162e0ca05b0 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -194,7 +194,7 @@ #clock-cells = <1>; #reset-cells = <1>; compatible = "amlogic,meson8-clkc"; - reg = <0x8000 0x4>, <0x4000 0x460>; + reg = <0x8000 0x4>, <0x4000 0x400>; }; reset: reset-controller at 4404 { -- 2.18.0