From mboxrd@z Thu Jan 1 00:00:00 1970 From: martin.blumenstingl@googlemail.com (Martin Blumenstingl) Date: Sun, 28 Oct 2018 15:03:43 +0100 Subject: [PATCH 3/3] ARM: dts: meson8b: mxq: add the /chosen/stdout-path property In-Reply-To: <20181028140343.1071-1-martin.blumenstingl@googlemail.com> References: <20181028140343.1071-1-martin.blumenstingl@googlemail.com> Message-ID: <20181028140343.1071-4-martin.blumenstingl@googlemail.com> To: linus-amlogic@lists.infradead.org List-Id: linus-amlogic.lists.infradead.org Support for this board is currently very limited. To debug any potential issues on this board the "earlycon" kernel parameter can be used (without any arguments). However, this requires the board to define a /chosen/stdout-path property in it's .dts. Signed-off-by: Martin Blumenstingl --- arch/arm/boot/dts/meson8b-mxq.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/meson8b-mxq.dts b/arch/arm/boot/dts/meson8b-mxq.dts index c7fdaeabbe7b..5c9b76af8d42 100644 --- a/arch/arm/boot/dts/meson8b-mxq.dts +++ b/arch/arm/boot/dts/meson8b-mxq.dts @@ -55,6 +55,10 @@ serial0 = &uart_AO; }; + chosen { + stdout-path = "serial0:115200n8"; + }; + memory { reg = <0x40000000 0x40000000>; }; -- 2.19.1