From: martin.blumenstingl@googlemail.com (Martin Blumenstingl)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH 2/2] ARM: dts: meson: meson8b: add the CPU OPP tables
Date: Fri, 30 Nov 2018 00:00:44 +0100 [thread overview]
Message-ID: <20181129230044.21358-3-martin.blumenstingl@googlemail.com> (raw)
In-Reply-To: <20181129230044.21358-1-martin.blumenstingl@googlemail.com>
The values are taken from Amlogic's 3.10 kernel sources.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
arch/arm/boot/dts/meson8b.dtsi | 66 ++++++++++++++++++++++++++++++++++
1 file changed, 66 insertions(+)
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index a38d187d3d6e..22d775460767 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -62,6 +62,8 @@
reg = <0x200>;
enable-method = "amlogic,meson8b-smp";
resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPUCLK>;
};
cpu1: cpu at 201 {
@@ -71,6 +73,8 @@
reg = <0x201>;
enable-method = "amlogic,meson8b-smp";
resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPUCLK>;
};
cpu2: cpu at 202 {
@@ -80,6 +84,8 @@
reg = <0x202>;
enable-method = "amlogic,meson8b-smp";
resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPUCLK>;
};
cpu3: cpu at 203 {
@@ -89,6 +95,66 @@
reg = <0x203>;
enable-method = "amlogic,meson8b-smp";
resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>;
+ operating-points-v2 = <&cpu_opp_table>;
+ clocks = <&clkc CLKID_CPUCLK>;
+ };
+ };
+
+ cpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-96000000 {
+ opp-hz = /bits/ 64 <96000000>;
+ opp-microvolt = <860000>;
+ };
+ opp-192000000 {
+ opp-hz = /bits/ 64 <192000000>;
+ opp-microvolt = <860000>;
+ };
+ opp-312000000 {
+ opp-hz = /bits/ 64 <312000000>;
+ opp-microvolt = <860000>;
+ };
+ opp-408000000 {
+ opp-hz = /bits/ 64 <408000000>;
+ opp-microvolt = <860000>;
+ };
+ opp-504000000 {
+ opp-hz = /bits/ 64 <504000000>;
+ opp-microvolt = <860000>;
+ };
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt = <860000>;
+ };
+ opp-720000000 {
+ opp-hz = /bits/ 64 <720000000>;
+ opp-microvolt = <860000>;
+ };
+ opp-816000000 {
+ opp-hz = /bits/ 64 <816000000>;
+ opp-microvolt = <900000>;
+ };
+ opp-1008000000 {
+ opp-hz = /bits/ 64 <1008000000>;
+ opp-microvolt = <1140000>;
+ };
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1140000>;
+ };
+ opp-1320000000 {
+ opp-hz = /bits/ 64 <1320000000>;
+ opp-microvolt = <1140000>;
+ };
+ opp-1488000000 {
+ opp-hz = /bits/ 64 <1488000000>;
+ opp-microvolt = <1140000>;
+ };
+ opp-1536000000 {
+ opp-hz = /bits/ 64 <1536000000>;
+ opp-microvolt = <1140000>;
};
};
--
2.19.2
next prev parent reply other threads:[~2018-11-29 23:00 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-29 23:00 [PATCH 0/2] ARM: dts: enable CPU frequency scaling on Meson8/Meson8b Martin Blumenstingl
2018-11-29 23:00 ` [PATCH 1/2] ARM: dts: meson: meson8: add the CPU OPP table Martin Blumenstingl
2018-11-29 23:00 ` Martin Blumenstingl [this message]
2018-12-05 0:53 ` [PATCH 0/2] ARM: dts: enable CPU frequency scaling on Meson8/Meson8b Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181129230044.21358-3-martin.blumenstingl@googlemail.com \
--to=martin.blumenstingl@googlemail.com \
--cc=linus-amlogic@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®