[PATCH 1/3] clk: meson: meson8b: fix the offset of vid_pll_dco's N value

[Martin Blumenstingl <martin.blumenstingl@googlemail.com>]

Unlike the other PLLs on Meson8b the N value "vid_pll_dco" (a better
name would be hdmi_pll_dco or - as the datasheet calls it - HPLL) is
located at HHI_VID_PLL_CNTL[14:10] instead of [13:9].
This results in an incorrect calculation of the rate of this PLL because
the value seen by the kernel is double the actual N (divider) value.
Update the offset of the N value to fix the calculation of the PLL rate.

Fixes: 28b9fcd016126e ("clk: meson8b: Add support for Meson8b clocks")
Reported-by: Jianxin Pan <jianxin.pan@amlogic.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
 drivers/clk/meson/meson8b.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index f906a9f0eefd..a4ae9c957fde 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -134,7 +134,7 @@ static struct clk_regmap meson8b_vid_pll_dco = {
 		},
 		.n = {
 			.reg_off = HHI_VID_PLL_CNTL,
-			.shift   = 9,
+			.shift   = 10,
 			.width   = 5,
 		},
 		.l = {
-- 
2.19.2


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic