From: Jerome Brunet <jbrunet@baylibre.com>
To: Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>,
Heiner Kallweit <hkallweit1@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Kevin Hilman <khilman@baylibre.com>
Cc: netdev@vger.kernel.org, linux-amlogic@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
Jerome Brunet <jbrunet@baylibre.com>
Subject: [PATCH net-next v3 0/4] net: phy: add Amlogic g12a support
Date: Thu, 4 Apr 2019 15:11:43 +0200 [thread overview]
Message-ID: <20190404131147.31156-1-jbrunet@baylibre.com> (raw)
This patchset adds the necessary bits to support network on the Amlogic
g12a SoC family.
Only the internal PHY and related MDIO mux needed to be addressed.
The GMAC remains compatible with axg SoC family
This series has been tested on the u200 (S905D2) with both the internal
and external (Realtek) PHYs.
Change since v2 [1]:
* Change 'clk part' Reviewed-by as suggested
* Remove default callback from phy drivers
* Use exact match PHY macros
* Default MDIO g12a as module if ARCH_MESON is enabled
* Don't print error on probe defer in the g12a mdio mux
Change since v1 [0]:
* drop '_' from function name unrelated to locking
* fix peripheral clock disable on error
* fix variable declaration reverse Xmas trees
* fix Kconfig dependency on CCF
(Actually needed for 'struct clk_hw', Thx Andrew !)
* Minor fix in the DT exemple as reported by Rob
[0] https://lkml.kernel.org/r/20190314140135.19184-1-jbrunet@baylibre.com
[1] https://lkml.kernel.org/r/20190329141512.29867-1-jbrunet@baylibre.com
Jerome Brunet (4):
dt-bindings: net: phy: add g12a mdio mux documentation
net: phy: add amlogic g12a mdio mux support
net: phy: meson-gxl: add g12a support
net: phy: meson-gxl: clean-up gxl variant driver
.../bindings/net/mdio-mux-meson-g12a.txt | 48 +++
drivers/net/phy/Kconfig | 11 +
drivers/net/phy/Makefile | 1 +
drivers/net/phy/mdio-mux-meson-g12a.c | 380 ++++++++++++++++++
drivers/net/phy/meson-gxl.c | 17 +-
5 files changed, 453 insertions(+), 4 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/mdio-mux-meson-g12a.txt
create mode 100644 drivers/net/phy/mdio-mux-meson-g12a.c
--
2.20.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next reply other threads:[~2019-04-04 13:12 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-04 13:11 Jerome Brunet [this message]
2019-04-04 13:11 ` [PATCH net-next v3 1/4] dt-bindings: net: phy: add g12a mdio mux documentation Jerome Brunet
2019-04-04 13:11 ` [PATCH net-next v3 2/4] net: phy: add amlogic g12a mdio mux support Jerome Brunet
2019-04-04 13:11 ` [PATCH net-next v3 3/4] net: phy: meson-gxl: add g12a support Jerome Brunet
2019-04-04 16:33 ` Florian Fainelli
2019-04-04 13:11 ` [PATCH net-next v3 4/4] net: phy: meson-gxl: clean-up gxl variant driver Jerome Brunet
2019-04-04 16:33 ` Florian Fainelli
2019-04-07 1:17 ` [PATCH net-next v3 0/4] net: phy: add Amlogic g12a support David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190404131147.31156-1-jbrunet@baylibre.com \
--to=jbrunet@baylibre.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=hkallweit1@gmail.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®