[PATCH 0/2] ARM: dts: meson: two GPU fixes

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
To: linux-amlogic@lists.infradead.org, khilman@baylibre.com
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/2] ARM: dts: meson: two GPU fixes
Date: Sat, 20 Apr 2019 11:32:56 +0200	[thread overview]
Message-ID: <20190420093258.2012-1-martin.blumenstingl@googlemail.com> (raw)

While switching over to the main mesa git repository I was testing
kmscube again. On my Meson8m2 board I noticed that two interrupts were
correctly set up. This didn't cause any errors so far because on my
setup the lima driver is using the "pp_bcast" interrupt instead of
ppX and ppmmuX.

While fixing the interrupt lines I also noticed that I accidentally
left the switch-delay property in there. That was needed at some
point to run the out-of-tree lima kernel driver. It's not required
anymore and it's not documented so drop it.

Target release: v5.2 (if possible because this is where the lima kernel
driver will land). No need to send it for v5.1-rcX because there lima
driver won't be part of v5.1.

Martin Blumenstingl (2):
  ARM: dts: meson8: fix GPU interrupts and drop an undocumented property
  ARM: dts: meson8b: drop undocumented property from the Mali GPU node

 arch/arm/boot/dts/meson8.dtsi  | 5 ++---
 arch/arm/boot/dts/meson8b.dtsi | 1 -
 2 files changed, 2 insertions(+), 4 deletions(-)

-- 
2.21.0

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic