From: Neil Armstrong <narmstrong@baylibre.com>
To: dri-devel@lists.freedesktop.org
Cc: linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH 2/2] drm/meson: fix G12A primary plane disabling
Date: Wed, 5 Jun 2019 16:12:53 +0200 [thread overview]
Message-ID: <20190605141253.24165-3-narmstrong@baylibre.com> (raw)
In-Reply-To: <20190605141253.24165-1-narmstrong@baylibre.com>
The G12A Primary plane was disabled by writing in the OSD1 configuration
registers, but this caused the plane blender to stall instead of continuing
blended only the overlay plane.
Fix this by disabling the OSD1 plane in the blender registers, and also
enabling it back using the same register.
Fixes: 490f50c109d1 ("drm/meson: Add G12A support for OSD1 Plane")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
drivers/gpu/drm/meson/meson_crtc.c | 2 ++
drivers/gpu/drm/meson/meson_plane.c | 4 ++--
drivers/gpu/drm/meson/meson_viu.c | 3 +--
3 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_crtc.c b/drivers/gpu/drm/meson/meson_crtc.c
index 50a9a96720b9..aa8ea107524e 100644
--- a/drivers/gpu/drm/meson/meson_crtc.c
+++ b/drivers/gpu/drm/meson/meson_crtc.c
@@ -252,6 +252,8 @@ static void meson_g12a_crtc_enable_osd1(struct meson_drm *priv)
writel_relaxed(priv->viu.osb_blend1_size,
priv->io_base +
_REG(VIU_OSD_BLEND_BLEND1_SIZE));
+ writel_bits_relaxed(3 << 8, 3 << 8,
+ priv->io_base + _REG(OSD1_BLEND_SRC_CTRL));
}
static void meson_crtc_enable_vd1(struct meson_drm *priv)
diff --git a/drivers/gpu/drm/meson/meson_plane.c b/drivers/gpu/drm/meson/meson_plane.c
index b788280895c6..d90427b93a51 100644
--- a/drivers/gpu/drm/meson/meson_plane.c
+++ b/drivers/gpu/drm/meson/meson_plane.c
@@ -318,8 +318,8 @@ static void meson_plane_atomic_disable(struct drm_plane *plane,
/* Disable OSD1 */
if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu"))
- writel_bits_relaxed(BIT(0) | BIT(21), 0,
- priv->io_base + _REG(VIU_OSD1_CTRL_STAT));
+ writel_bits_relaxed(3 << 8, 0,
+ priv->io_base + _REG(OSD1_BLEND_SRC_CTRL));
else
writel_bits_relaxed(VPP_OSD1_POSTBLEND, 0,
priv->io_base + _REG(VPP_MISC));
diff --git a/drivers/gpu/drm/meson/meson_viu.c b/drivers/gpu/drm/meson/meson_viu.c
index 462c7cb3e1bd..4b2b3024d371 100644
--- a/drivers/gpu/drm/meson/meson_viu.c
+++ b/drivers/gpu/drm/meson/meson_viu.c
@@ -405,8 +405,7 @@ void meson_viu_init(struct meson_drm *priv)
0 << 16 |
1,
priv->io_base + _REG(VIU_OSD_BLEND_CTRL));
- writel_relaxed(3 << 8 |
- 1 << 20,
+ writel_relaxed(1 << 20,
priv->io_base + _REG(OSD1_BLEND_SRC_CTRL));
writel_relaxed(1 << 20,
priv->io_base + _REG(OSD2_BLEND_SRC_CTRL));
--
2.21.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2019-06-05 14:13 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-05 14:12 [PATCH 0/2] drm/meson: fix " Neil Armstrong
2019-06-05 14:12 ` [PATCH 1/2] " Neil Armstrong
2019-06-06 17:25 ` Kevin Hilman
2019-06-07 8:07 ` Neil Armstrong
2019-06-05 14:12 ` Neil Armstrong [this message]
2019-06-06 17:30 ` [PATCH 2/2] drm/meson: fix G12A " Kevin Hilman
2019-06-07 8:07 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190605141253.24165-3-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®