mirror of https://lore.kernel.org/linux-amlogic/
 help / color / mirror / Atom feed
From: Neil Armstrong <narmstrong@baylibre.com>
To: jbrunet@baylibre.com, khilman@baylibre.com
Cc: Neil Armstrong <narmstrong@baylibre.com>,
	martin.blumenstingl@googlemail.com, linux-kernel@vger.kernel.org,
	linux-amlogic@lists.infradead.org, linux-clk@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [RFC/RFT 11/14] arm64: dts: meson-g12a: add cpus OPP table
Date: Thu, 20 Jun 2019 17:00:10 +0200	[thread overview]
Message-ID: <20190620150013.13462-12-narmstrong@baylibre.com> (raw)
In-Reply-To: <20190620150013.13462-1-narmstrong@baylibre.com>

Add the OPP table taken from the vendor u200 and u211 DTS.

The Amlogic G12A SoC seems to available in 3 types :
- low-speed: up to 1,8GHz
- mid-speed: up to 1,908GHz
- high-speed: up to 2.1GHz

And the S905X2 opp voltages are slightly higher than the S905D2
OPP voltages for the low-speed table.

This adds the conservative OPP table with the S905X2 higher voltages
and the maximum low-speed OPP frequency.

The values were tested to be stable on an Amlogic U200 Reference Board,
SeiRobotics SEI510 and X96 Max Set-Top-Boxes running the arm64 cpuburn
at [1] and cycling between all the possible cpufreq translations and
checking the final frequency using the clock-measurer, script at [2].

[1] https://github.com/ssvb/cpuburn-arm/blob/master/cpuburn-a53.S
[2] https://gist.github.com/superna9999/d4de964dbc0f84b7d527e1df2ddea25f

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 62 ++++++++++++++++++++-
 1 file changed, 59 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index ac15967bb7fa..ba9aab39fd95 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -48,8 +48,64 @@
 			compatible = "cache";
 		};
 	};
-};
 
-&sd_emmc_a {
-	amlogic,dram-access-quirk;
+	cpu_opp_table: opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-250000000 {
+			opp-hz = /bits/ 64 <250000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-500000000 {
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-667000000 {
+			opp-hz = /bits/ 64 <666666666>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-1000000000 {
+			opp-hz = /bits/ 64 <1000000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <731000>;
+		};
+
+		opp-1398000000 {
+			opp-hz = /bits/ 64 <1398000000>;
+			opp-microvolt = <761000>;
+		};
+
+		opp-1512000000 {
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-microvolt = <791000>;
+		};
+
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <831000>;
+		};
+
+		opp-1704000000 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-microvolt = <861000>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <981000>;
+		};
+	};
 };
-- 
2.21.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  parent reply	other threads:[~2019-06-20 15:05 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-06-20 14:59 [RFC/RFT 00/14] arm64: g12a: add support for DVFS Neil Armstrong
2019-06-20 15:00 ` [RFC/RFT 01/14] pinctrl: meson-g12a: add pwm_a on GPIOE_2 pinmux Neil Armstrong
2019-06-20 15:00 ` [RFC/RFT 02/14] clk: core: introduce clk_hw_set_parent() Neil Armstrong
2019-06-25 20:32   ` Stephen Boyd
2019-06-26  8:22     ` Neil Armstrong
2019-06-20 15:00 ` [RFC/RFT 03/14] clk: meson: regmap: export regmap_div ops functions Neil Armstrong
2019-06-20 15:00 ` [RFC/RFT 04/14] clk: meson: eeclk: add setup callback Neil Armstrong
2019-06-20 15:00 ` [RFC/RFT 05/14] soc: amlogic: meson-clk-measure: protect measure with a mutex Neil Armstrong
2019-06-25 20:27   ` Stephen Boyd
2019-06-26  8:24     ` Neil Armstrong
2019-06-26 18:06       ` Stephen Boyd
2019-06-20 15:00 ` [RFC/RFT 06/14] soc: amlogic: meson-clk-measure: add G12B second cluster cpu clk Neil Armstrong
2019-06-20 15:00 ` [RFC/RFT 07/14] clk: meson: g12a: add notifiers to handle cpu clock change Neil Armstrong
2019-06-25 20:31   ` Stephen Boyd
2019-06-26  8:27     ` Neil Armstrong
2019-06-20 15:00 ` [RFC/RFT 08/14] clk: meson: g12a: expose CPUB clock ID for G12B Neil Armstrong
2019-06-20 15:00 ` [RFC/RFT 09/14] arm64: dts: move common G12A & G12B modes to meson-g12-common.dtsi Neil Armstrong
2019-06-20 15:00 ` [RFC/RFT 10/14] arm64: dts: meson-g12-common: add pwm_a on GPIOE_2 pinmux Neil Armstrong
2019-06-20 15:00 ` Neil Armstrong [this message]
2019-06-20 15:00 ` [RFC/RFT 12/14] arm64: dts: meson-g12a: enable DVFS on G12A boards Neil Armstrong
2019-06-20 15:00 ` [RFC/RFT 13/14] arm64: dts: meson-g12b: add cpus OPP tables Neil Armstrong
2019-06-20 15:00 ` [RFC/RFT 14/14] arm64: dts: meson-g12b-odroid-n2: enable DVFS Neil Armstrong
2019-06-24  8:22   ` Neil Armstrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190620150013.13462-12-narmstrong@baylibre.com \
    --to=narmstrong@baylibre.com \
    --cc=jbrunet@baylibre.com \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=martin.blumenstingl@googlemail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®