From: Neil Armstrong <narmstrong@baylibre.com>
To: khilman@baylibre.com
Cc: linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Neil Armstrong <narmstrong@baylibre.com>
Subject: [PATCH] arm64: dts: meson-g12-common: add spicc controller nodes
Date: Fri, 13 Mar 2020 10:14:01 +0100 [thread overview]
Message-ID: <20200313091401.15888-1-narmstrong@baylibre.com> (raw)
This adds the controller and pinctrl nodes for the Amlogic G12A SPICC
controllers.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
Kevin,
This depends on the CLKID_SPICC0_SCLK and CLKID_SPICC1_SCLK introduced
in https://lore.kernel.org/linux-arm-kernel/20200219084928.28707-2-narmstrong@baylibre.com/
Neil
.../boot/dts/amlogic/meson-g12-common.dtsi | 75 +++++++++++++++++++
1 file changed, 75 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index abe04f4ad7d8..3e1dfa80651d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -957,6 +957,57 @@
};
};
+ spicc0_x_pins: spicc0-x {
+ mux {
+ groups = "spi0_mosi_x",
+ "spi0_miso_x",
+ "spi0_clk_x";
+ function = "spi0";
+ drive-strength-microamp = <4000>;
+ bias-disable;
+ };
+ };
+
+ spicc0_ss0_x_pins: spicc0-ss0-x {
+ mux {
+ groups = "spi0_ss0_x";
+ function = "spi0";
+ drive-strength-microamp = <4000>;
+ bias-disable;
+ };
+ };
+
+ spicc0_c_pins: spicc0-c {
+ mux {
+ groups = "spi0_mosi_c",
+ "spi0_miso_c",
+ "spi0_ss0_c",
+ "spi0_clk_c";
+ function = "spi0";
+ drive-strength-microamp = <4000>;
+ bias-disable;
+ };
+ };
+
+ spicc1_pins: spicc1 {
+ mux {
+ groups = "spi1_mosi",
+ "spi1_miso",
+ "spi1_clk";
+ function = "spi1";
+ drive-strength-microamp = <4000>;
+ };
+ };
+
+ spicc1_ss0_pins: spicc1-ss0 {
+ mux {
+ groups = "spi1_ss0";
+ function = "spi1";
+ drive-strength-microamp = <4000>;
+ bias-disable;
+ };
+ };
+
tdm_a_din0_pins: tdm-a-din0 {
mux {
groups = "tdm_a_din0";
@@ -2051,6 +2102,30 @@
amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
};
+ spicc0: spi@13000 {
+ compatible = "amlogic,meson-g12a-spicc";
+ reg = <0x0 0x13000 0x0 0x44>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc CLKID_SPICC0>,
+ <&clkc CLKID_SPICC0_SCLK>;
+ clock-names = "core", "pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spicc1: spi@15000 {
+ compatible = "amlogic,meson-g12a-spicc";
+ reg = <0x0 0x15000 0x0 0x44>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc CLKID_SPICC1>,
+ <&clkc CLKID_SPICC1_SCLK>;
+ clock-names = "core", "pclk";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
pwm_ef: pwm@19000 {
compatible = "amlogic,meson-g12a-ee-pwm";
reg = <0x0 0x19000 0x0 0x20>;
--
2.22.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next reply other threads:[~2020-03-13 9:14 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-13 9:14 Neil Armstrong [this message]
2020-03-16 15:31 ` Kevin Hilman
2020-03-16 16:59 ` Neil Armstrong
2020-03-16 23:01 ` patchwork-bot+linux-amlogic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200313091401.15888-1-narmstrong@baylibre.com \
--to=narmstrong@baylibre.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®